Hi Ikjoon,
Thank you for the patch.
On 13/5/21 3:45, Ikjoon Jang wrote:
> On Thu, May 13, 2021 at 12:38 AM Matthias Brugger
> <matthias.bgg@xxxxxxxxx> wrote:
>>
>> Hi Ikjoon,
>>
>> On 10/05/2021 11:26, Ikjoon Jang wrote:
>>> Add a 'cbas' device node for supporting table mode switch in
>
> tablet
>
>>> kukui devices.
>>>
>>> Kukui platforms with detacheable base have an additional input
>>> device under cros-ec, which reports SW_TABLET_MODE regarding
>>> its base state (e.g. base flipped or detached).
>>>
>>> Signed-off-by: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
>>> ---
>>>
>>> arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
>>> 1 file changed, 4 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>>> index ff56bcfa3370..40030ed48854 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
>>> @@ -816,6 +816,10 @@ usbc_extcon: extcon0 {
>>> compatible = "google,extcon-usbc-cros-ec";
>>> google,usb-port-id = <0>;
>>> };
>>> +
>>> + base_detection: cbas {
This should be just cbas, remove base_detection. It was a bit confusing follow
these series. If [v5, 2/2] is already applied in hid tree, I'd suggest send a v7
version including:
[v7, 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device
[v7, 2/2] arm64: dts: mt8183: add cbas node under cros_ec
Both patches can go through the Matthias tree, but the first one also needs an
Ack from Lee Jones, MFD maintainer, which I think is not cc'ied, so unlikely to
give you the needed ack.
Thanks,
Enric
>>> + compatible = "google,cros-cbas";
>>
>> I'm not able to find any binding description for this. It seems linux-next has
>> driver binding to this compatible, but the description is missing.
>>
>> Can you please clarify.
>
> Yep, that's correct.
> Let me resend this with v2 after the dt-binding patch is applied.
>
> In this series, I requested queueing these to hid tree:
>
> [v5, 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device
> https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-2-ikjn@xxxxxxxxxxxx/
>
> [v5, 2/2] HID: google: Add of_match table to Whiskers switch device.
> https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-3-ikjn@xxxxxxxxxxxx/
>
> Later I found that I missed a comment from [v5, 1/2]
> But only [v5, 2/2] part is already applied to hid tree as I asked for it.
>
> I sent a v6 dt-binding patch is here (not yet applied)
> https://patchwork.kernel.org/project/linux-input/patch/20210512100832.3878138-1-ikjn@xxxxxxxxxxxx/
>
>>
>> Thanks,
>> Mathias
>>
>>> + };
>>> };
>>> };
>>>
>>>
