On Thu, May 13, 2021 at 12:38 AM Matthias Brugger
<matthias.bgg@xxxxxxxxx> wrote:
>
> Hi Ikjoon,
>
> On 10/05/2021 11:26, Ikjoon Jang wrote:
> > Add a 'cbas' device node for supporting table mode switch in
tablet
> > kukui devices.
> >
> > Kukui platforms with detacheable base have an additional input
> > device under cros-ec, which reports SW_TABLET_MODE regarding
> > its base state (e.g. base flipped or detached).
> >
> > Signed-off-by: Ikjoon Jang <ikjn@xxxxxxxxxxxx>
> > ---
> >
> > arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
> > 1 file changed, 4 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > index ff56bcfa3370..40030ed48854 100644
> > --- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > +++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
> > @@ -816,6 +816,10 @@ usbc_extcon: extcon0 {
> > compatible = "google,extcon-usbc-cros-ec";
> > google,usb-port-id = <0>;
> > };
> > +
> > + base_detection: cbas {
> > + compatible = "google,cros-cbas";
>
> I'm not able to find any binding description for this. It seems linux-next has
> driver binding to this compatible, but the description is missing.
>
> Can you please clarify.
Yep, that's correct.
Let me resend this with v2 after the dt-binding patch is applied.
In this series, I requested queueing these to hid tree:
[v5, 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device
https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-2-ikjn@xxxxxxxxxxxx/
[v5, 2/2] HID: google: Add of_match table to Whiskers switch device.
https://patchwork.kernel.org/project/linux-input/patch/20210415032958.740233-3-ikjn@xxxxxxxxxxxx/
Later I found that I missed a comment from [v5, 1/2]
But only [v5, 2/2] part is already applied to hid tree as I asked for it.
I sent a v6 dt-binding patch is here (not yet applied)
https://patchwork.kernel.org/project/linux-input/patch/20210512100832.3878138-1-ikjn@xxxxxxxxxxxx/
>
> Thanks,
> Mathias
>
> > + };
> > };
> > };
> >
> >
