[PATCH 1/2] arm64: dts: qcom: sm8350: fix names of qupv3_id_0 and uart3

[Jonathan Marek <jonathan@xxxxxxxx>]

Use the correct names for these.

Fixes: 0684074a46e8 ("arm64: dts: qcom: Add basic devicetree support for SM8350-MTP board")
Fxies: 9208c19f2124 ("arm64: dts: qcom: Introduce SM8350 HDK")
Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 6 +++---
 arch/arm64/boot/dts/qcom/sm8350-mtp.dts | 6 +++---
 arch/arm64/boot/dts/qcom/sm8350.dtsi    | 4 ++--
 3 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index f23a0cf3f7b7..8cc507ce2230 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -14,7 +14,7 @@ / {
 	compatible = "qcom,sm8350-hdk", "qcom,sm8350";
 
 	aliases {
-		serial0 = &uart2;
+		serial0 = &uart3;
 	};
 
 	chosen {
@@ -219,7 +219,7 @@ &mpss {
 	firmware-name = "qcom/sm8350/modem.mbn";
 };
 
-&qupv3_id_1 {
+&qupv3_id_0 {
 	status = "okay";
 };
 
@@ -232,7 +232,7 @@ &tlmm {
 	gpio-reserved-ranges = <52 8>;
 };
 
-&uart2 {
+&uart3 {
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
index 6ca638b4e321..423581751ed0 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-mtp.dts
@@ -20,7 +20,7 @@ / {
 	compatible = "qcom,sm8350-mtp", "qcom,sm8350";
 
 	aliases {
-		serial0 = &uart2;
+		serial0 = &uart3;
 	};
 
 	chosen {
@@ -286,7 +286,7 @@ &mpss {
 	firmware-name = "qcom/sm8350/modem.mbn";
 };
 
-&qupv3_id_1 {
+&qupv3_id_0 {
 	status = "okay";
 };
 
@@ -299,7 +299,7 @@ &tlmm {
 	gpio-reserved-ranges = <52 8>;
 };
 
-&uart2 {
+&uart3 {
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index ed0b51bc03ea..76a1df371b17 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -443,7 +443,7 @@ ipcc: mailbox@408000 {
 			#mbox-cells = <2>;
 		};
 
-		qupv3_id_1: geniqup@9c0000 {
+		qupv3_id_0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0x0 0x009c0000 0x0 0x6000>;
 			clock-names = "m-ahb", "s-ahb";
@@ -454,7 +454,7 @@ qupv3_id_1: geniqup@9c0000 {
 			ranges;
 			status = "disabled";
 
-			uart2: serial@98c000 {
+			uart3: serial@98c000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0 0x0098c000 0 0x4000>;
 				clock-names = "se";
-- 
2.26.1