On Wed, May 12, 2021 at 04:43:08PM +0530, satya priya wrote: > diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > new file mode 100644 > index 0000000..85381a0 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml > @@ -0,0 +1,245 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pinctrl/qcom,pmic-gpio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm PMIC GPIO block > + > +maintainers: > + - Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx> > + > +description: | > + This binding describes the GPIO block(s) found in the 8xxx series of > + PMIC's from Qualcomm. > + > +properties: > + compatible: > + items: > + - enum: > + - qcom,pm8005-gpio pm8008 has been missed out in the yaml file during the conversion. could you please add this as well? > + - qcom,pm8018-gpio > + - qcom,pm8038-gpio > + - qcom,pm8058-gpio > + - qcom,pm8916-gpio > + - qcom,pm8917-gpio > + - qcom,pm8921-gpio > + - qcom,pm8941-gpio > + - qcom,pm8950-gpio > + - qcom,pm8994-gpio > + - qcom,pm8998-gpio > + - qcom,pma8084-gpio > + - qcom,pmi8950-gpio > + - qcom,pmi8994-gpio > + - qcom,pmi8998-gpio > + - qcom,pms405-gpio > + - qcom,pm660-gpio > + - qcom,pm660l-gpio > + - qcom,pm8150-gpio > + - qcom,pm8150b-gpio > + - qcom,pm6150-gpio > + - qcom,pm6150l-gpio > + - qcom,pmx55-gpio > + - qcom,pm7325-gpio > + - qcom,pm8350c-gpio > + - qcom,pmk8350-gpio > + - qcom,pmr735a-gpio > + > + - enum: > + - qcom,spmi-gpio > + - qcom,ssbi-gpio > + > + reg: > + maxItems: 1 > + > + interrupts: > + minItems: 1 > + maxItems: 44 > + > + '#interrupt-cells': > + const: 2 > + > + interrupt-controller: true > + > + gpio-controller: true > + > + gpio-ranges: > + maxItems: 1 > + > + '#gpio-cells': > + const: 2 > + description: | > + The first cell will be used to define gpio number and the > + second denotes the flags for this gpio > + > + gpio-keys: > + type: object > + properties: > + volume-keys: > + type: object > + anyOf: > + - $ref: "pinmux-node.yaml" > + - $ref: "pincfg-node.yaml" > + properties: > + pins: > + description: | > + List of gpio pins affected by the properties specified in > + this subnode. Valid pins are > + - gpio1-gpio4 for pm8005 pm8008 has been missed out in the yaml file during the conversion. could you please add this as well? > + - gpio1-gpio6 for pm8018 > + - gpio1-gpio12 for pm8038 > + - gpio1-gpio40 for pm8058
