>-----Original Message-----
>From: Shawn Guo <shawnguo@xxxxxxxxxx>
>Sent: Tuesday, May 11, 2021 6:07 AM
[...]
>Subject: Re: [PATCH] arm64: dts: fsl-ls1028a: Correct ECAM PCIE window
>ranges
>
>+ Claudiu
>
>On Wed, Apr 07, 2021 at 02:34:38PM +0200, Kornel Duleba wrote:
>> Currently all PCIE windows point to bus address 0x0, which does not match
>> the values obtained from hardware during EA.
>> Replace those values with CPU addresses, since in reality we
>> have a 1:1 mapping between the two.
>>
>> Signed-off-by: Kornel Duleba <mindal@xxxxxxxxxxxx>
>
>Claudiu,
>
>Do you have any comment on this?
>
Well, probing is still working with this change, I've just tested it.
PCI listing at boot time changes from:
pci-host-generic 1f0000000.pcie: host bridge /soc/pcie@1f0000000 ranges:
pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x0000000000
pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x0000000000
to:
pci-host-generic 1f0000000.pcie: host bridge /soc/pcie@1f0000000 ranges:
pci-host-generic 1f0000000.pcie: MEM 0x01f8000000..0x01f815ffff -> 0x01f8000000
pci-host-generic 1f0000000.pcie: MEM 0x01f8160000..0x01f81cffff -> 0x01f8160000
and looks reasonable.
Adding Vladimir and Alex just in case.
Acked-by: Claudiu Manoil <claudiu.manoil@xxxxxxx>
>Shawn
>
>> ---
>> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> index 262fbad8f0ec..85c62a6fabb6 100644
>> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
>> @@ -994,19 +994,19 @@ pcie@1f0000000 { /* Integrated Endpoint Root Complex */
>> msi-map = <0 &its 0x17 0xe>;
>> iommu-map = <0 &smmu 0x17 0xe>;
>> /* PF0-6 BAR0 - non-prefetchable memory */
>> - ranges = <0x82000000 0x0 0x00000000 0x1 0xf8000000 0x0 0x160000
>> + ranges = <0x82000000 0x1 0xf8000000 0x1 0xf8000000 0x0 0x160000
>> /* PF0-6 BAR2 - prefetchable memory */
>> - 0xc2000000 0x0 0x00000000 0x1 0xf8160000 0x0 0x070000
>> + 0xc2000000 0x1 0xf8160000 0x1 0xf8160000 0x0 0x070000
>> /* PF0: VF0-1 BAR0 - non-prefetchable memory */
>> - 0x82000000 0x0 0x00000000 0x1 0xf81d0000 0x0 0x020000
>> + 0x82000000 0x1 0xf81d0000 0x1 0xf81d0000 0x0 0x020000
>> /* PF0: VF0-1 BAR2 - prefetchable memory */
>> - 0xc2000000 0x0 0x00000000 0x1 0xf81f0000 0x0 0x020000
>> + 0xc2000000 0x1 0xf81f0000 0x1 0xf81f0000 0x0 0x020000
>> /* PF1: VF0-1 BAR0 - non-prefetchable memory */
>> - 0x82000000 0x0 0x00000000 0x1 0xf8210000 0x0 0x020000
>> + 0x82000000 0x1 0xf8210000 0x1 0xf8210000 0x0 0x020000
>> /* PF1: VF0-1 BAR2 - prefetchable memory */
>> - 0xc2000000 0x0 0x00000000 0x1 0xf8230000 0x0 0x020000
>> + 0xc2000000 0x1 0xf8230000 0x1 0xf8230000 0x0 0x020000
>> /* BAR4 (PF5) - non-prefetchable memory */
>> - 0x82000000 0x0 0x00000000 0x1 0xfc000000 0x0 0x400000>;
>> + 0x82000000 0x1 0xfc000000 0x1 0xfc000000 0x0 0x400000>;
>>
>> enetc_port0: ethernet@0,0 {
>> compatible = "fsl,enetc";
>> --
>> 2.31.1
>>
