/arch/arm/boot/dts/rk3228-evb.dt.yaml: pwm@110b0020: clock-names: ['pwm'] is too short Devices with only one PWM clock use it to both to derive the functional clock for the device and as the bus clock. The driver does not need "clock-names" to get a handle, so remove them all. make ARCH=arm dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml Signed-off-by: Johan Jonker <jbx6244@xxxxxxxxx> --- arch/arm/boot/dts/rk322x.dtsi | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 9fbd96c3f..61028a5c9 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -384,7 +384,6 @@ reg = <0x110b0000 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm0_pin>; status = "disabled"; @@ -395,7 +394,6 @@ reg = <0x110b0010 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm1_pin>; status = "disabled"; @@ -406,7 +404,6 @@ reg = <0x110b0020 0x10>; #pwm-cells = <3>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm2_pin>; status = "disabled"; @@ -417,7 +414,6 @@ reg = <0x110b0030 0x10>; #pwm-cells = <2>; clocks = <&cru PCLK_PWM>; - clock-names = "pwm"; pinctrl-names = "default"; pinctrl-0 = <&pwm3_pin>; status = "disabled"; -- 2.11.0
