This configures the PHY reference clock input according to the newly
introduced fsl,refclk-pad-mode DT property. The default in absence
of this property is to use the refclk pad on i.MX8MQ and the internal
reference clock on all other SoCs, keeping compatibility with existing
devicetrees, but allowing boards to configure this when they differ
from the default.
Signed-off-by: Lucas Stach <l.stach@xxxxxxxxxxxxxx>
---
drivers/pci/controller/dwc/pci-imx6.c | 22 ++++++++++++++++------
1 file changed, 16 insertions(+), 6 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
index 5e13758222e8..f184077f6d17 100644
--- a/drivers/pci/controller/dwc/pci-imx6.c
+++ b/drivers/pci/controller/dwc/pci-imx6.c
@@ -79,6 +79,7 @@ struct imx6_pcie {
u32 tx_deemph_gen2_6db;
u32 tx_swing_full;
u32 tx_swing_low;
+ u32 refclk_pad_mode;
struct regulator *vpcie;
void __iomem *phy_base;
@@ -613,18 +614,17 @@ static void imx6_pcie_init_phy(struct imx6_pcie *imx6_pcie)
{
switch (imx6_pcie->drvdata->variant) {
case IMX8MQ:
- /*
- * TODO: Currently this code assumes external
- * oscillator is being used
- */
regmap_update_bits(imx6_pcie->iomuxc_gpr,
imx6_pcie_grp_offset(imx6_pcie),
IMX8MQ_GPR_PCIE_REF_USE_PAD,
- IMX8MQ_GPR_PCIE_REF_USE_PAD);
+ imx6_pcie->refclk_pad_mode == 1 ?
+ IMX8MQ_GPR_PCIE_REF_USE_PAD : 0);
break;
case IMX7D:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
- IMX7D_GPR12_PCIE_PHY_REFCLK_SEL, 0);
+ IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
+ imx6_pcie->refclk_pad_mode == 1 ?
+ IMX7D_GPR12_PCIE_PHY_REFCLK_SEL : 0);
break;
case IMX6SX:
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR12,
@@ -1049,6 +1049,12 @@ static int imx6_pcie_probe(struct platform_device *pdev)
"pcie_inbound_axi clock missing or invalid\n");
break;
case IMX8MQ:
+ /*
+ * i.MX8MQ is special, as the default refclk pad mode is set to
+ * input in order to keep compatibility with old devicetrees.
+ */
+ imx6_pcie->refclk_pad_mode = 1;
+
imx6_pcie->pcie_aux = devm_clk_get(dev, "pcie_aux");
if (IS_ERR(imx6_pcie->pcie_aux))
return dev_err_probe(dev, PTR_ERR(imx6_pcie->pcie_aux),
@@ -1114,6 +1120,10 @@ static int imx6_pcie_probe(struct platform_device *pdev)
&imx6_pcie->tx_swing_low))
imx6_pcie->tx_swing_low = 127;
+ /* get PHY refclk pad mode */
+ of_property_read_u32(node, "fsl,refclk-pad-mode",
+ &imx6_pcie->refclk_pad_mode);
+
/* Limit link speed */
pci->link_gen = 1;
ret = of_property_read_u32(node, "fsl,max-link-speed", &pci->link_gen);
--
2.29.2
