This series uses the additional DAIs added to the sun8i-codec driver to
add hardware routing for BT SCO (headset) audio on the PinePhone.
The BT audio connection is represented by the "dummy" bt-sco codec. The
connection to the Quectel EG-25G modem via AIF2 works as well, but I do
not include it here because there is no appropriate codec driver in
tree. We have been using an out-of-tree "dummy" codec driver for the
modem similar to bt-sco, and I'm not sure if such a driver would be
desired upstream.
Changes from v2:
- Also accept #sound-dai-cells in the binding. Since dt-core.yaml
already sets the type of this property, it is not possible to use
oneOf, nor make a specific value deprecated.
Changes from v1:
- Fixed DT binding example to follow new binding
Arnaud Ferraris (1):
arm64: dts: allwinner: pinephone: Set audio card name
Samuel Holland (6):
ASoC: dt-bindings: sun8i-codec: Increase #sound-dai-cells
ARM: dts: sun8i-a33: Allow using multiple codec DAIs
arm64: dts: allwinner: a64: Allow using multiple codec DAIs
arm64: dts: allwinner: a64: Add pinmux nodes for AIF2/AIF3
arm64: dts: allwinner: a64: Allow multiple DAI links
arm64: dts: allwinner: pinephone: Add support for Bluetooth audio
.../sound/allwinner,sun8i-a33-codec.yaml | 8 +++-
arch/arm/boot/dts/sun8i-a33.dtsi | 4 +-
.../dts/allwinner/sun50i-a64-pinephone.dtsi | 25 +++++++++++++
arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 37 ++++++++++++++-----
4 files changed, 60 insertions(+), 14 deletions(-)
--
2.26.3
