[PATCH] dt-bindings: pinctrl: convert Broadcom Northstar to the json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Rafał Miłecki <rafal@xxxxxxxxxx>

Important: this change converts the binding as it is. It includes
dependency on undocumented CRU that must be refactored. That will be
handled once every CRU MFD subdevice gets documented properly (including
pinmux).

Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
 .../bindings/pinctrl/brcm,bcm4708-pinmux.txt  | 55 -----------
 .../bindings/pinctrl/brcm,ns-pinmux.yaml      | 98 +++++++++++++++++++
 2 files changed, 98 insertions(+), 55 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
 create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
deleted file mode 100644
index 8ab2d468dbdb..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm4708-pinmux.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Broadcom Northstar pins mux controller
-
-Some of Northstar SoCs's pins can be used for various purposes thanks to the mux
-controller. This binding allows describing mux controller and listing available
-functions. They can be referenced later by other bindings to let system
-configure controller correctly.
-
-A list of pins varies across chipsets so few bindings are available.
-
-Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
-noce.
-
-Required properties:
-- compatible: must be one of:
-	"brcm,bcm4708-pinmux"
-	"brcm,bcm4709-pinmux"
-	"brcm,bcm53012-pinmux"
-- offset: offset of pin registers in the CRU block
-
-Functions and their groups available for all chipsets:
-- "spi": "spi_grp"
-- "i2c": "i2c_grp"
-- "pwm": "pwm0_grp", "pwm1_grp", "pwm2_grp", "pwm3_grp"
-- "uart1": "uart1_grp"
-
-Additionally available on BCM4709 and BCM53012:
-- "mdio": "mdio_grp"
-- "uart2": "uart2_grp"
-- "sdio": "sdio_pwr_grp", "sdio_1p8v_grp"
-
-For documentation of subnodes see:
-Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
-
-Example:
-	dmu@1800c000 {
-		compatible = "simple-bus";
-		ranges = <0 0x1800c000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		cru@100 {
-			compatible = "syscon", "simple-mfd";
-			reg = <0x100 0x1a4>;
-
-			pinctrl {
-				compatible = "brcm,bcm4708-pinmux";
-				offset = <0xc0>;
-
-				spi-pins {
-					function = "spi";
-					groups = "spi_grp";
-				};
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
new file mode 100644
index 000000000000..1cba8f0db5c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,ns-pinmux.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/brcm,ns-pinmux.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar pins mux controller
+
+maintainers:
+  - Rafał Miłecki <rafal@xxxxxxxxxx>
+
+description:
+  Some of Northstar SoCs's pins can be used for various purposes thanks to the
+  mux controller. This binding allows describing mux controller and listing
+  available functions. They can be referenced later by other bindings to let
+  system configure controller correctly.
+
+  A list of pins varies across chipsets so few bindings are available.
+
+  Node of the pinmux must be nested in the CRU (Central Resource Unit) "syscon"
+  node.
+
+properties:
+  compatible:
+    enum:
+      - brcm,bcm4708-pinmux
+      - brcm,bcm4709-pinmux
+      - brcm,bcm53012-pinmux
+
+  offset:
+    description: offset of pin registers in the CRU block
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+
+patternProperties:
+  '-pins$':
+    type: object
+    description: pin node
+    $ref: pinmux-node.yaml#
+
+    properties:
+      function:
+        enum: [ spi, i2c, pwm, uart1, mdio, uart2, sdio ]
+      groups:
+        items:
+          enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+                  uart1_grp, mdio_grp, uart2_grp, sdio_pwr_grp, sdio_1p8v_grp ]
+
+    required:
+      - function
+      - groups
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: brcm,bcm4708-pinmux
+    then:
+      patternProperties:
+        '-pins$':
+          properties:
+            function:
+              enum: [ spi, i2c, pwm, uart1 ]
+            groups:
+              items:
+                enum: [ spi_grp, i2c_grp, pwm0_grp, pwm1_grp, pwm2_grp, pwm3_grp,
+                        uart1_grp ]
+
+required:
+  - offset
+
+additionalProperties: false
+
+examples:
+  - |
+    dmu@1800c000 {
+        compatible = "simple-bus";
+        ranges = <0 0x1800c000 0x1000>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        cru@100 {
+            compatible = "syscon", "simple-mfd";
+            reg = <0x100 0x1a4>;
+
+            pinctrl {
+                compatible = "brcm,bcm4708-pinmux";
+                offset = <0xc0>;
+
+                spi-pins {
+                    function = "spi";
+                    groups = "spi_grp";
+                };
+            };
+        };
+    };
-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux