[PATCH 1/3] net: ethernet: ixp4xx: Add DT bindings

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

This adds device tree bindings for the IXP4xx ethernet
controller with optional MDIO bridge.

Cc: Zoltan HERPAI <wigyori@xxxxxxx>
Cc: Raylynn Knight <rayknight@xxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
ChangeLog v1->v2:
- Add schema for the (optional) embedded MDIO bus inside
  the ethernet controller in an "mdio" node instead of just
  letting the code randomly populate and present it to
  the operating system.
- Reference the standard schemas for ethernet controller and
  MDIO buses.
- Add intel,npe to indentify the NPE unit used with each
  ethernet adapter.
---
 .../bindings/net/intel,ixp4xx-ethernet.yaml   | 80 +++++++++++++++++++
 1 file changed, 80 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml

diff --git a/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
new file mode 100644
index 000000000000..55ef6ff7d171
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/intel,ixp4xx-ethernet.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2018 Linaro Ltd.
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/net/intel,ixp4xx-ethernet.yaml#";
+$schema: "http://devicetree.org/meta-schemas/core.yaml#";
+
+title: Intel IXP4xx ethernet
+
+allOf:
+  - $ref: "ethernet-controller.yaml#"
+
+maintainers:
+  - Linus Walleij <linus.walleij@xxxxxxxxxx>
+
+description: |
+  The Intel IXP4xx ethernet makes use of the IXP4xx NPE (Network
+  Processing Engine) and the IXP4xx Queue Mangager to process
+  the ethernet frames. It can optionally contain an MDIO bus to
+  talk to PHYs.
+
+properties:
+  compatible:
+    const: intel,ixp4xx-ethernet
+
+  reg:
+    maxItems: 1
+    description: Ethernet MMIO address range
+
+  queue-rx:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the RX queue on the NPE
+
+  queue-txready:
+    $ref: '/schemas/types.yaml#/definitions/phandle-array'
+    maxItems: 1
+    description: phandle to the TX READY queue on the NPE
+
+  phy-handle: true
+
+  intel,npe:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3]
+    description: which NPE (Network Processing Engine) this ethernet
+      instance is using
+
+  mdio:
+    type: object
+    $ref: "mdio.yaml#"
+    description: optional node for embedded MDIO controller
+
+required:
+  - compatible
+  - reg
+  - queue-rx
+  - queue-txready
+
+additionalProperties: false
+
+examples:
+  - |
+    ethernet@c8009000 {
+      compatible = "intel,ixp4xx-ethernet";
+      reg = <0xc8009000 0x1000>;
+      status = "disabled";
+      queue-rx = <&qmgr 3>;
+      queue-txready = <&qmgr 20>;
+      intel,npe = <1>;
+      phy-handle = <&phy1>;
+
+      mdio {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        phy1: phy@1 {
+          #phy-cells = <0>;
+          reg = <1>;
+        };
+      };
+    };
-- 
2.29.2