Add support for the 10.3" E Ink panel described at: https://www.eink.com/product.html?type=productdetail&id=7 Signed-off-by: Alistair Francis <alistair@xxxxxxxxxxxxx> --- drivers/gpu/drm/panel/panel-simple.c | 29 ++++++++++++++++++++++++++++ 1 file changed, 29 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c index 4e2dad314c79..f1f6fd2517f6 100644 --- a/drivers/gpu/drm/panel/panel-simple.c +++ b/drivers/gpu/drm/panel/panel-simple.c @@ -1964,6 +1964,32 @@ static const struct panel_desc edt_etm0700g0bdh6 = { .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, }; +static const struct display_timing eink_vb3300_kca_timing = { + .pixelclock = { 40000000, 40000000, 40000000 }, + .hactive = { 334, 334, 334 }, + .hfront_porch = { 1, 1, 1 }, + .hback_porch = { 1, 1, 1 }, + .hsync_len = { 1, 1, 1 }, + .vactive = { 1405, 1405, 1405 }, + .vfront_porch = { 1, 1, 1 }, + .vback_porch = { 1, 1, 1 }, + .vsync_len = { 1, 1, 1 }, + .flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW | + DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE, +}; + +static const struct panel_desc eink_vb3300_kca = { + .modes = &edt_etm0700g0dh6_mode, + .num_modes = 1, + .bpc = 6, + .size = { + .width = 157, + .height = 209, + }, + .bus_format = MEDIA_BUS_FMT_RGB888_1X24, + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE, +}; + static const struct display_timing evervision_vgg804821_timing = { .pixelclock = { 27600000, 33300000, 50000000 }, .hactive = { 800, 800, 800 }, @@ -4232,6 +4258,9 @@ static const struct of_device_id platform_of_match[] = { }, { .compatible = "edt,etm0700g0dh6", .data = &edt_etm0700g0dh6, + }, { + .compatible = "eink,vb3300-kca", + .data = &eink_vb3300_kca, }, { .compatible = "edt,etm0700g0bdh6", .data = &edt_etm0700g0bdh6, -- 2.31.1
