Hi Thierry, I'm pretty sure all of your review comments have been tended to now. Some have been fixed-up by myself and re-rolled into the original set. The larger changes have been fixed as subsequent patches for ease of review and history tracking on the internal kernel. Kind regards, Lee Ajit Pal Singh (4): pwm: st: Fix PWM prescaler handling pwm: sti: Ensure same period values for all channels pwm: sti: Sync between enable/disable calls pwm: sti: Remove PWM period table Lee Jones (7): ARM: stih407: Add DT nodes for for PWM ARM: stih416: Add Pinctrl settings for PWM ARM: stih416: Add DT nodes for PWM ARM: stih416-b2020e: Enable PWM on the B2020 Rev-E ARM: multi_v7_defconfig: Enable ST's PWM driver pwm: sti: Add new driver for ST's PWM IP pwm: sti: Supply Device Tree binding documentation for ST's PWM IP Documentation/devicetree/bindings/pwm/pwm-st.txt | 41 +++ arch/arm/boot/dts/stih407.dtsi | 28 ++ arch/arm/boot/dts/stih416-b2020e.dts | 10 + arch/arm/boot/dts/stih416-pinctrl.dtsi | 50 +++ arch/arm/boot/dts/stih416.dtsi | 44 ++- arch/arm/configs/multi_v7_defconfig | 1 + drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-sti.c | 418 +++++++++++++++++++++++ 9 files changed, 602 insertions(+), 1 deletion(-) create mode 100644 Documentation/devicetree/bindings/pwm/pwm-st.txt create mode 100644 drivers/pwm/pwm-sti.c -- 1.8.3.2 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html