On Mon, Mar 29, 2021 at 9:17 PM Palmer Dabbelt <palmer@xxxxxxxxxxx> wrote: > > On Wed, 03 Mar 2021 12:02:48 PST (-0800), Atish Patra wrote: > > This series adds minimal support for Microchip Polar Fire Soc Icicle kit. > > It is rebased on v5.12-rc1 and depends on clock support. > > Only MMC and ethernet drivers are enabled via this series. > > The idea here is to add the foundational patches so that other drivers > > can be added to on top of this. The device tree may change based on > > feedback on bindings of individual driver support patches. > > > > This series has been tested on Qemu and Polar Fire Soc Icicle kit. > > It depends on the updated clock-series[2] and macb fix[3]. > > The series is also tested by Lewis from Microchip. > > > > The series can also be found at. > > https://github.com/atishp04/linux/tree/polarfire_support_upstream_v4 > > > > [1] https://lists.nongnu.org/archive/html/qemu-devel/2020-10/msg08582.html > > [2] https://www.spinics.net/lists/linux-clk/msg54579.html > > > > Changes from v3->v4: > > 1. Fixed few DT specific issues. > > 2. Rebased on top of new clock driver. > > 3. SD card functionality is verified. > > > > Changes from v2->v3: > > 1. Fixed a typo in dt binding. > > 2. Included MAINTAINERS entry for PolarFire SoC. > > 3. Improved the dts file by using lowercase clock names and keeping phy > > details in board specific dts file. > > > > Changes from v1->v2: > > 1. Modified the DT to match the device tree in U-Boot. > > 2. Added both eMMC & SDcard entries in DT. However, SD card is only enabled > > as it allows larger storage option for linux distros. > > > > Atish Patra (4): > > RISC-V: Add Microchip PolarFire SoC kconfig option > > dt-bindings: riscv: microchip: Add YAML documentation for the > > PolarFire SoC > > RISC-V: Initial DTS for Microchip ICICLE board > > RISC-V: Enable Microchip PolarFire ICICLE SoC > > > > Conor Dooley (1): > > MAINTAINERS: add microchip polarfire soc support > > > > .../devicetree/bindings/riscv/microchip.yaml | 27 ++ > > MAINTAINERS | 8 + > > arch/riscv/Kconfig.socs | 7 + > > arch/riscv/boot/dts/Makefile | 1 + > > arch/riscv/boot/dts/microchip/Makefile | 2 + > > .../microchip/microchip-mpfs-icicle-kit.dts | 72 ++++ > > .../boot/dts/microchip/microchip-mpfs.dtsi | 329 ++++++++++++++++++ > > arch/riscv/configs/defconfig | 4 + > > 8 files changed, 450 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/riscv/microchip.yaml > > create mode 100644 arch/riscv/boot/dts/microchip/Makefile > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs-icicle-kit.dts > > create mode 100644 arch/riscv/boot/dts/microchip/microchip-mpfs.dtsi > > I had this left in my inbox waiting for either some reviews to come in or a v2, > but I don't see any. Did I miss something? > Sorry for the late reply. I am on vacation until May. I think I saw all the patches have already been reviewed. Let me know if it is not the case. > _______________________________________________ > linux-riscv mailing list > linux-riscv@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-riscv -- Regards, Atish
