Add cadence-wdt bindings documentation. Signed-off-by: Harini Katakam <harinik@xxxxxxxxxx> --- v3 changes: - Change reset property type and improve description. - Improve description of clocks and interrupts. - Use watchdog@ in the example. - Use only cdns compatible string for now. v2: No changes --- .../devicetree/bindings/watchdog/cadence-wdt.txt | 27 ++++++++++++++++++++ 1 file changed, 27 insertions(+) create mode 100644 Documentation/devicetree/bindings/watchdog/cadence-wdt.txt diff --git a/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt new file mode 100644 index 0000000..ab23e38 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/cadence-wdt.txt @@ -0,0 +1,27 @@ +Zynq Watchdog Device Tree Bindings +------------------------------------------- + +Required properties: +- compatible : Should be "cdns,wdt-r1p2". +- clocks : Input clock specifier. This should be the ref clk. +- reg : Physical base address and size of WDT registers map. +- interrupts : Property with a value describing the interrupt + number. This interrupt is used for indication + when the watchdog times out. +- interrupt-parent : Must be core interrupt controller. + +Optional properties +- reset : If this property exists, then a reset is done + when watchdog times out. +- timeout-sec : Watchdog timeout value (in seconds). + +Example: + watchdog@f8005000 { + compatible = "xlnx,zynq-wdt-r1p2"; + clocks = <&clkc 45>; + interrupt-parent = <&intc>; + interrupts = <0 9 1>; + reg = <0xf8005000 0x1000>; + reset; + timeout-sec = <10>; + }; -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html