On Wed, Apr 07, 2021 at 02:14:23PM +0300, Ivan Uvarov wrote: > This patch series adds devicetree support for the Forlinx FETA40i-C SoM > and OKA40i-C carrier board/devboard. > > The FETA40i-C is an "industrial/automotive" SoM by Forlinx. > > SoM specs: > - SoC: R40 or A40i > - PMIC: AXP221S > - RAM: 1GiB/2GiB DDR3 (dual-rank) > - eMMC: 8GB, > - Mates with carrier board via four 80-pin connectors (AXK6F80337YG). > > OKA40i-C is a carrier board by the same manufacturer for this SoM, > whose main purpose is as a development board with a variety of > peripherals: > > - Power: DC5V barrel or USB OTG or 4.2V Lipo battery > - Video out: HDMI, TV out, LVDS > - WiFi+Bluetooth: RL-UM02WBS-8723BU-V1.2 (802.11 b/g/n, BT V2.1/3.0/4.0) > - Ethernet: 10/100Mbps > - Storage: µSD, fullsize SD, eMMC (on SoM), SATA > - USB: 3 x USB2.0 Host (2 via hub, 1 native), 1 x USB2.0 OTG (micro-B) > - UART: RS232, RS485, 4 3.3v uarts (of which 2 have RTS/CTS) > - Other I/O: SPI x2, TWI, SDIO header, GPIO header, JTAG header > - Mini PCIe slot with sim holder for WLAN modem > - Smart card holder > - RTC (RX8010SJ) > - Two user LEDs > - Three user buttons (via KeyADC). > > Of the board features listed above, support for the following has *NOT* > been tested: > - TV out & LVDS > - SATA > - Smart cards > - KeyADC buttons (no support) > > The series consists of five patches, with dependencies as follows: > > * Patch 4 depends on patch 3; > * Patch 5 depends on patches 2&4. > > The rest are independent, however patch 2 may refuse to apply > without patch 1. > > Signed-off-by: Ivan Uvarov <i.uvarov@xxxxxxxxxxxxxxxxxx> Applied, thanks Maxime
Attachment:
signature.asc
Description: PGP signature
