[PATCH 4/4] can: m_can_platform: Add support for transceiver as phy

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Faiz Abbas <faiz_abbas@xxxxxx>

Add support for implementing transceiver node as phy. The max_bitrate is
obtained by getting a phy attribute.

Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
Signed-off-by: Aswath Govindraju <a-govindraju@xxxxxx>
---
 drivers/net/can/m_can/m_can_platform.c | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
index 599de0e08cd7..4a762b5a21d8 100644
--- a/drivers/net/can/m_can/m_can_platform.c
+++ b/drivers/net/can/m_can/m_can_platform.c
@@ -6,6 +6,7 @@
 // Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
 
 #include <linux/platform_device.h>
+#include <linux/phy/phy.h>
 
 #include "m_can.h"
 
@@ -67,7 +68,9 @@ static int m_can_plat_probe(struct platform_device *pdev)
 	struct resource *res;
 	void __iomem *addr;
 	void __iomem *mram_addr;
+	struct phy *transceiver;
 	int irq, ret = 0;
+	u32 bitrate_max;
 
 	mcan_class = m_can_class_allocate_dev(&pdev->dev,
 					      sizeof(struct m_can_plat_priv));
@@ -101,6 +104,28 @@ static int m_can_plat_probe(struct platform_device *pdev)
 		goto probe_fail;
 	}
 
+	transceiver = devm_phy_optional_get(&pdev->dev, "can_transceiver");
+	if (IS_ERR(transceiver)) {
+		ret = PTR_ERR(transceiver);
+		dev_err(&pdev->dev, "error while getting phy, err=%d\n", ret);
+		return ret;
+	}
+
+	if (!transceiver) {
+		dev_warn(&pdev->dev, "No transceiver phy found\n");
+	} else {
+		ret = phy_power_on(transceiver);
+		if (ret) {
+			dev_err(&pdev->dev, "error powering on phy, err=%d\n", ret);
+			return ret;
+		}
+		/* converting from Mbps to bps */
+		bitrate_max = (transceiver->attrs.max_link_rate) * 1000000;
+		if (!bitrate_max)
+			dev_warn(&pdev->dev, "Invalid value for transceiver max bitrate. Ignoring bitrate limit\n");
+		priv->cdev.can.bitrate_max = bitrate_max;
+	}
+
 	priv->base = addr;
 	priv->mram_base = mram_addr;
 
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux