Convert the Generic 8-bit shift register Device Tree binding documentation to json-schema. Rename from gpio-74x164 to fairchild,74hc595, as the former refers to the Linux driver, and not to a hardware name. Add the missing hog description. Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> --- The original file did not contain license information, so I used the most popular/recommended one for DT bindings. I listed the original author of the bindings as maintainer. --- .../bindings/gpio/fairchild,74hc595.yaml | 77 +++++++++++++++++++ .../devicetree/bindings/gpio/gpio-74x164.txt | 27 ------- 2 files changed, 77 insertions(+), 27 deletions(-) create mode 100644 Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-74x164.txt diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml new file mode 100644 index 0000000000000000..5fe19fa5f67c551f --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/fairchild,74hc595.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic 8-bit shift register + +maintainers: + - Maxime Ripard <mripard@xxxxxxxxxx> + +properties: + compatible: + enum: + - fairchild,74hc595 + - nxp,74lvc594 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The second cell is only used to specify the GPIO polarity. + const: 2 + + registers-number: + description: Number of daisy-chained shift registers + + enable-gpios: + description: GPIO connected to the OE (Output Enable) pin. + maxItems: 1 + + spi-max-frequency: true + +patternProperties: + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": + type: object + + properties: + gpio-hog: true + gpios: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - registers-number + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <4>; + spi-max-frequency = <100000>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt deleted file mode 100644 index 2a97553d8d76d9f5..0000000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Generic 8-bits shift register GPIO driver - -Required properties: -- compatible: Should contain one of the following: - "fairchild,74hc595" - "nxp,74lvc594" -- reg : chip select number -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- registers-number: Number of daisy-chained shift registers - -Optional properties: -- enable-gpios: GPIO connected to the OE (Output Enable) pin. - -Example: - -gpio5: gpio5@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <4>; - spi-max-frequency = <100000>; -}; -- 2.25.1
