From: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Binding documentation for this driver was missing. Note that the binding and some in tree dts files specifiy interrupts etc but the driver is fairly simple and does not yet make use of them. Listed both Joachim and myself as maintainers for this binding on basis it's Joachim's driver but I don't want to volunteer Joachim too strongly to look after this doc. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> Cc: Joachim Eastwood <manabian@xxxxxxxxx> --- .../bindings/iio/accel/fsl,mma7455.yaml | 82 +++++++++++++++++++ 1 file changed, 82 insertions(+) diff --git a/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml new file mode 100644 index 000000000000..7c8f8bdc2333 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/accel/fsl,mma7455.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/fsl,mma7455.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MMA7455 and MMA7456 three axis accelerometers + +maintainers: + - Joachim Eastwood <manabian@xxxxxxxxx> + - Jonathan Cameron <jic23@xxxxxxxxxx> + +description: + Devices support both SPI and I2C interfaces. + +properties: + compatible: + enum: + - fsl,mma7455 + - fsl,mma7456 + reg: + maxItems: 1 + + avdd-supply: true + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + description: + Data ready is only available on INT1, but events can use either or + both pins. If not specified, first element assumed to correspond + to INT1 and second (where present) to INT2. + minItems: 1 + maxItems: 2 + items: + enum: + - "INT1" + - "INT2" + + spi-max-frequency: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + # include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@18 { + compatible = "fsl,mma7455"; + reg = <0x18>; + vddio-supply = <&iovdd>; + avdd-supply = <&avdd>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>, <58 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT2", "INT1"; + }; + }; + - | + # include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + accelerometer@0 { + compatible = "fsl,mma7456"; + reg = <0>; + spi-max-frequency = <10000000>; + vddio-supply = <&iovdd>; + avdd-supply = <&avdd>; + interrupts = <57 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "INT1"; + }; + }; +... -- 2.31.1
