Due to a hardware bug preventing the correct detection if the ID pin
the USB OTG port cannot be used in otg mode. It can either be set to
host or peripheral. Set it to peripheral so vbus is disabled by default.
Signed-off-by: Stefan Riedmueller <s.riedmueller@xxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
index d434868e870a..b2f78b4362cb 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi
@@ -164,6 +164,7 @@ &usbh1 {
&usbotg {
status = "okay";
+ dr_mode = "peripheral";
};
&usdhc2 {
--
2.25.1
