File snps,dwc3.yaml describes the schema of Synopsys DesignWare USB3
Controller, it directly or indirectly contains "$ref: usb.yaml". So the
node name of "snps,dwc3" must start with "usb". Otherwise, the following
warning will be displayed:
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.example.dt.yaml: \
dwc3@38100000: $nodename:0: 'dwc3@38100000' does not match '^usb(@.*)?'
From schema: Documentation/devicetree/bindings/usb/snps,dwc3.yaml
In addition, replace "type: object" with "$ref: snps,dwc3.yaml#". Ensure
that all properties of the child node comply with snps,dwc3.yaml.
Signed-off-by: Zhen Lei <thunder.leizhen@xxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml | 9 +++------
1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
index cb4c6f6d3a33a3f..974032b1fda04fb 100644
--- a/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/fsl,imx8mp-dwc3.yaml
@@ -52,11 +52,8 @@ properties:
# Required child node:
patternProperties:
- "^dwc3@[0-9a-f]+$":
- type: object
- description:
- A child node must exist to represent the core DWC3 IP block
- The content of the node is defined in dwc3.txt.
+ "^usb@[0-9a-f]+$":
+ $ref: snps,dwc3.yaml#
required:
- compatible
@@ -87,7 +84,7 @@ examples:
dma-ranges = <0x40000000 0x40000000 0xc0000000>;
ranges;
- dwc3@38100000 {
+ usb@38100000 {
compatible = "snps,dwc3";
reg = <0x38100000 0x10000>;
clocks = <&clk IMX8MP_CLK_HSIO_AXI>,
--
1.8.3
