Hi Emil, On Thu, 2021-03-25 at 14:14 +0000, Emil Velikov wrote: > On Wed, 24 Mar 2021 at 15:17, Rob Herring <robh@xxxxxxxxxx> wrote: > > > > On Thu, Mar 11, 2021 at 03:40:51PM +0000, Emil Velikov wrote: > > > From: Emil Velikov <emil.velikov@xxxxxxxxxxxxx> > > > > > > Add devicetree binding documentation for the Hantro G1/G2 VDEC on > > > the Microchip SAMAS5D4 SoC. > > > > > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > > > Cc: Frank Rowand <frowand.list@xxxxxxxxx> > > > Cc: devicetree@xxxxxxxxxxxxxxx> > > > Signed-off-by: Emil Velikov <emil.velikov@xxxxxxxxxxxxx> > > > --- > > > v2 > > > - Newly introduced > > > - s/Atmel/Microchip/ (Nicolas) > > > - Drop leading 0 in node name/address > > > --- > > > .../media/microchip,sama5d4-vdec.yaml | 59 +++++++++++++++++++ > > > 1 file changed, 59 insertions(+) > > > create mode 100644 Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml > > > > > > diff --git a/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml b/Documentation/devicetree/bindings/media/microchip,sama5d4- > > > vdec.yaml > > > new file mode 100644 > > > index 000000000000..9cb2c0295d54 > > > --- /dev/null > > > +++ b/Documentation/devicetree/bindings/media/microchip,sama5d4-vdec.yaml > > > @@ -0,0 +1,59 @@ > > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > > + > > > +%YAML 1.2 > > > +--- > > > +$id: "http://devicetree.org/schemas/media/microchip,sama5d4-vdec.yaml#" > > > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > > > + > > > +title: Hantro G1 VPU codec implemented on Microchip SAMA5D4 SoCs > > > + > > > +maintainers: > > > + - Emil Velikov <emil.velikov@xxxxxxxxxxxxx> > > > + > > > +description: > > > + Hantro G1 video decode accelerator present on Microchip SAMA5D4 SoCs. > > > + > > > +properties: > > > + compatible: > > > + const: microchip,sama5d4-vdec > > > + > > > + reg: > > > + maxItems: 1 > > > + > > > + interrupts: > > > + maxItems: 1 > > > + > > > + interrupt-names: > > > + items: > > > + - const: vdec > > > > Why do you need a name? *-names are used to distinguish multiple entries > > and don't add anything if only a single entry. > > > On one hand the names are used to describe the hardware - the SAMA > board uses designated clock and interrupt lines - both called "vdec". > Additionally the names are ultimately required by the underlying API - > platform_get_irq_byname and devm_clk_bulk_get respectively. > How can we get the respective entries without the name? > There are APIs to get the resource by index as opposed to by name. E.g. platform_get_irq. However, you are confusing here internal kernel implementation with devicetree bindings. The latter is just a representation of the hardware. > Skimming through the existing dts file - > arch/arm/boot/dts/sama5d4.dtsi and other dts files - there are lots of > examples where the device tree binding contains the name for a single > clock/interrupt. > Note that dtsi and dts are the device-tree files, not the bindings. And even if you find examples, the fact that there exist examples doesn't mean it's the right thing to do. Thanks, Ezequiel