The "meat" of this series is in the last patch which is the change that actually starts making use of the interrupts to drive a state machine. The dt-bindings patches can probably go in at any time. The rest of the series isn't dependent on them. I've tested it on a T2081 based system with a number of i2c and smbus devices. Its the end of my work day so I figured I'd get this out now but I'll do some more testing on a P2041 board and a few different i2c devices tomorrow. Chris Packham (6): dt-bindings: i2c-mpc: Document interrupt property as required dt-bindings: i2c: convert i2c-mpc to json-schema i2c: mpc: Make use of i2c_recover_bus() i2c: mpc: make interrupt mandatory and remove polling code i2c: mpc: use device managed APIs i2c: mpc: Interrupt driven transfer .../devicetree/bindings/i2c/i2c-mpc.txt | 62 --- .../devicetree/bindings/i2c/i2c-mpc.yaml | 99 ++++ drivers/i2c/busses/i2c-mpc.c | 513 ++++++++++-------- 3 files changed, 373 insertions(+), 301 deletions(-) delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-mpc.txt create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mpc.yaml -- 2.30.2
