Hi Alistair, On Mon, Mar 15, 2021 at 11:27 PM Alistair Francis <alistair@xxxxxxxxxxxxx> wrote: > > The reMarkable2 (https://remarkable.com) is an e-ink tablet based on > the imx7d SoC. > > This commit is based on the DTS provide by reMarkable but ported to the > latest kernel (instead of 4.14). I have removed references to > non-upstream devices and have changed the UART so that the console can > be accessed without having to open up the device via the OTG pogo pins. > > Currently the kernel boots, but there is no support for the display. > > WiFi is untested (no dispaly or UART RX makes it hard to test), but "display" > + memory { > + reg = <0x80000000 0x40000000>; > + }; This should be: memory@80000000 { device_type = "memory"; reg = <0x80000000 0x40000000>; }; > +&crypto { > + status = "disabled"; > +}; Why do you need to disable this node? > +&dma_apbh { > + status = "disabled"; > +}; Same here. > +&sdma { > + status = "okay"; > +}; No need to enable it in the board file. > +&iomuxc_lpsr { > + pinctrl_digitizer_reg: digitizerreggrp { This is not referenced from anywhere.
