Hi Mike,
On Sat, Mar 20, 2021 at 10:59:42AM +0800, Leo Yan wrote:
> From: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
>
> Add DT binding for CoreSight System Trace Macrocell (STM) on msm8916,
> which can benefit the CoreSight development on DB410c.
For the DT binding for CoreSight STM on DB410c, I have one question:
Do you know there have any CTI is conntected to STM so that the DT
binding needs to reflect the connection? If this is the case, we
should update the DT binding for CTI node as well.
Thanks,
Leo
>
> Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
> Signed-off-by: Leo Yan <leo.yan@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 1 +
> arch/arm64/boot/dts/qcom/msm8916.dtsi | 27 +++++++++++++++++++++++
> 2 files changed, 28 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> index 3a9538e1ec97..dd87e5d739ab 100644
> --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
> @@ -406,6 +406,7 @@ &wcd_codec {
> &etm1 { status = "okay"; };
> &etm2 { status = "okay"; };
> &etm3 { status = "okay"; };
> +&stm { status = "okay"; };
> &etr { status = "okay"; };
> &funnel0 { status = "okay"; };
> &funnel1 { status = "okay"; };
> diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> index 402e891a84ab..892f1772e53c 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
> @@ -562,6 +562,13 @@ funnel0_in4: endpoint {
> remote-endpoint = <&funnel1_out>;
> };
> };
> +
> + port@7 {
> + reg = <7>;
> + funnel0_in7: endpoint {
> + remote-endpoint = <&stm_out>;
> + };
> + };
> };
>
> out-ports {
> @@ -882,6 +889,26 @@ etm3_out: endpoint {
> };
> };
>
> + stm: stm@802000 {
> + compatible = "arm,coresight-stm", "arm,primecell";
> + reg = <0x802000 0x1000>,
> + <0x9280000 0x180000>;
> + reg-names = "stm-base", "stm-stimulus-base";
> +
> + clocks = <&rpmcc RPM_QDSS_CLK>, <&rpmcc RPM_QDSS_A_CLK>;
> + clock-names = "apb_pclk", "atclk";
> +
> + status = "disabled";
> +
> + out-ports {
> + port {
> + stm_out: endpoint {
> + remote-endpoint = <&funnel0_in7>;
> + };
> + };
> + };
> + };
> +
> msmgpio: pinctrl@1000000 {
> compatible = "qcom,msm8916-pinctrl";
> reg = <0x01000000 0x300000>;
> --
> 2.25.1
>
