As reported by the TI spruh73x RM, MPU and LCD modules support spread spectrum clocking (SSC) on their output clocks. SSC is used to spread the spectral peaking of the clock to reduce any electromagnetic interference (EMI) that may be caused due to the clock’s fundamental or any of its harmonics. The series allows you to enable and adjust the spread spectrum clocking for all am33xx PLLs for which it is supported. Changes in v2: - Remove SSC registers from dpll_core_ck@490 node (SSC is not supported) - Add SSC registers to dpll_mpu_ck@488 node. - Move the DT changes to the previous patch in the series. Dario Binacchi (4): clk: ti: fix typo in routine description dt-bindings: ti: dpll: add spread spectrum support ARM: dts: am33xx-clocks: add spread spectrum support clk: ti: add am33xx spread spectrum clock support .../devicetree/bindings/clock/ti/dpll.txt | 20 +++++ arch/arm/boot/dts/am33xx-clocks.dtsi | 4 +- drivers/clk/ti/dpll.c | 41 +++++++++ drivers/clk/ti/dpll3xxx.c | 87 ++++++++++++++++++- include/linux/clk/ti.h | 24 +++++ 5 files changed, 173 insertions(+), 3 deletions(-) -- 2.17.1
