[PATCH] arm64: dts: broadcom: bcm4908: add Ethernet TX irq

[Rafał Miłecki <zajec5@xxxxxxxxx>]

From: Rafał Miłecki <rafal@xxxxxxxxxx>

This hardware supports two interrupts, one per DMA channel (RX and TX).

Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
 arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 29fda356f730..8060178b365d 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -116,8 +116,9 @@ enet: ethernet@2000 {
 			compatible = "brcm,bcm4908-enet";
 			reg = <0x2000 0x1000>;
 
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "rx";
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "rx", "tx";
 		};
 
 		usb_phy: usb-phy@c200 {
-- 
2.26.2