Document the Sparx5 reset device driver bindings The driver uses a syscon and an IO range on sparx5 for access to the reset control and the reset status. Sparx5 will no longer use the existing Ocelot chip reset driver, but use this new switch reset driver as it has the reset controller interface that allows the first client to perform the reset on behalf of all the Sparx5 component drivers. Signed-off-by: Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx> --- .../bindings/reset/microchip,rst.yaml | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/microchip,rst.yaml diff --git a/Documentation/devicetree/bindings/reset/microchip,rst.yaml b/Documentation/devicetree/bindings/reset/microchip,rst.yaml new file mode 100644 index 000000000000..370579aeeca1 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/microchip,rst.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/reset/microchip,rst.yaml#"; +$schema: "http://devicetree.org/meta-schemas/core.yaml#"; + +title: Microchip Sparx5 Switch Reset Controller + +maintainers: + - Steen Hegelund <steen.hegelund@xxxxxxxxxxxxx> + - Lars Povlsen <lars.povlsen@xxxxxxxxxxxxx> + +description: | + The Microchip Sparx5 Switch provides reset control and implements the following + functions + - One Time Switch Core Reset (Soft Reset) + +properties: + $nodename: + pattern: "^reset-controller@[0-9a-f]+$" + + compatible: + const: microchip,sparx5-switch-reset + + reg: + items: + - description: global control block registers + + reg-names: + items: + - const: gcb + + "#reset-cells": + const: 1 + + cpu-syscon: + $ref: "/schemas/types.yaml#/definitions/phandle" + description: syscon used to access CPU reset + +required: + - compatible + - reg + - reg-names + - "#reset-cells" + - cpu-syscon + +additionalProperties: false + +examples: + - | + reset: reset-controller@11010008 { + compatible = "microchip,sparx5-switch-reset"; + reg = <0x11010008 0x4>; + reg-names = "gcb"; + #reset-cells = <1>; + cpu-syscon = <&cpu_ctrl>; + }; + -- 2.30.2
