Re: [PATCH v4 4/4] i2c: stm32f4: Fix stmpe811 get xyz data timeout issue

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Mar 15, 2021 at 08:43:54PM +0800, dillon min wrote:
> Hi All,
> 
> Just a gentle ping.

Pierre-Yves?

> 
> Regards.
> 
> On Tue, Jun 9, 2020 at 9:27 PM <dillon.minfei@xxxxxxxxx> wrote:
> >
> > From: dillon min <dillon.minfei@xxxxxxxxx>
> >
> > as stm32f429's internal flash is 2Mbytes and compiled kernel
> > image bigger than 2Mbytes, so we have to load kernel image
> > to sdram on stm32f429-disco board which has 8Mbytes sdram space.
> >
> > based on above context, as you knows kernel running on external
> > sdram is more slower than internal flash. besides, we need read 4
> > bytes to get touch screen xyz(x, y, pressure) coordinate data in
> > stmpe811 interrupt.
> >
> > so, in stm32f4_i2c_handle_rx_done, as i2c read slower than running
> > in xip mode, have to adjust 'STOP/START bit set position' from last
> > two bytes to last one bytes. else, will get i2c timeout in reading
> > touch screen coordinate.
> >
> > to not take side effect, introduce IIC_LAST_BYTE_POS to support xip
> > kernel or has mmu platform.
> >
> > Signed-off-by: dillon min <dillon.minfei@xxxxxxxxx>
> > ---
> >
> > V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
> >
> >  drivers/i2c/busses/i2c-stm32f4.c | 12 +++++++++---
> >  1 file changed, 9 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-stm32f4.c b/drivers/i2c/busses/i2c-stm32f4.c
> > index d6a69dfcac3f..97cf42ae7fa0 100644
> > --- a/drivers/i2c/busses/i2c-stm32f4.c
> > +++ b/drivers/i2c/busses/i2c-stm32f4.c
> > @@ -93,6 +93,12 @@
> >  #define STM32F4_I2C_MAX_FREQ           46U
> >  #define HZ_TO_MHZ                      1000000
> >
> > +#if !defined(CONFIG_MMU) && !defined(CONFIG_XIP_KERNEL)
> > +#define IIC_LAST_BYTE_POS 1
> > +#else
> > +#define IIC_LAST_BYTE_POS 2
> > +#endif
> > +
> >  /**
> >   * struct stm32f4_i2c_msg - client specific data
> >   * @addr: 8-bit slave addr, including r/w bit
> > @@ -439,7 +445,7 @@ static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
> >         int i;
> >
> >         switch (msg->count) {
> > -       case 2:
> > +       case IIC_LAST_BYTE_POS:
> >                 /*
> >                  * In order to correctly send the Stop or Repeated Start
> >                  * condition on the I2C bus, the STOP/START bit has to be set
> > @@ -454,7 +460,7 @@ static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
> >                 else
> >                         stm32f4_i2c_set_bits(reg, STM32F4_I2C_CR1_START);
> >
> > -               for (i = 2; i > 0; i--)
> > +               for (i = IIC_LAST_BYTE_POS; i > 0; i--)
> >                         stm32f4_i2c_read_msg(i2c_dev);
> >
> >                 reg = i2c_dev->base + STM32F4_I2C_CR2;
> > @@ -463,7 +469,7 @@ static void stm32f4_i2c_handle_rx_done(struct stm32f4_i2c_dev *i2c_dev)
> >
> >                 complete(&i2c_dev->complete);
> >                 break;
> > -       case 3:
> > +       case (IIC_LAST_BYTE_POS+1):
> >                 /*
> >                  * In order to correctly generate the NACK pulse after the last
> >                  * received data byte, we have to enable NACK before reading N-2
> > --
> > 2.7.4
> >

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux