Convert the Freescale DSPI binding to DT schema format using json-schema. Signed-off-by: Kuldeep Singh <kuldeep.singh@xxxxxxx> --- Hi Rob, This patch is checked with following commands with no warnings observed. make distclean; make allmodconfig; make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml; make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml .../bindings/spi/fsl,spi-fsl-dspi.yaml | 131 ++++++++++++++++++ .../devicetree/bindings/spi/spi-fsl-dspi.txt | 65 --------- MAINTAINERS | 2 +- 3 files changed, 132 insertions(+), 66 deletions(-) create mode 100644 Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml delete mode 100644 Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt diff --git a/Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml new file mode 100644 index 000000000000..15ffc83bdba6 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml @@ -0,0 +1,131 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/spi/fsl,spi-fsl-dspi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale DSPI Controller + +maintainers: + - Vladimir Oltean <olteanv@xxxxxxxxx> + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + oneOf: + - enum: + - fsl,vf610-dspi + - fsl,ls1021a-v1.0-dspi + - fsl,ls1028a-dspi + - fsl,ls2085a-dspi + - fsl,lx2160a-dspi + - items: + - enum: + - fsl,ls1012a-dspi + - fsl,ls1028a-dspi + - fsl,ls1043a-dspi + - fsl,ls1046a-dspi + - fsl,ls1088a-dspi + - const: fsl,ls1021a-v1.0-dspi + - items: + - enum: + - fsl,ls2080a-dspi + - fsl,lx2160a-dspi + - const: fsl,ls2085a-dspi + + reg: + maxItems: 1 + description: Offset and length of registers + + interrupts: + maxItems: 1 + + clocks: + items: + - description: SoC dspi clock + + clock-names: + items: + - const: dspi + + pinctrl-names: + minItems: 1 + items: + - const: default + description: + Names for the pin configuration must be "default" + + dmas: + maxItems: 2 + + dma-names: + items: + - const: tx + - const: rx + + spi-num-chipselects: + maxItems: 1 + description: Number of the chipselect signals + + bus-num: + items: + - description: Slave chip chipselect signal number + +patternProperties: + "@[0-9a-f]+": + type: object + + properties: + fsl,spi-cs-sck-delay: + description: + Delay in nanoseconds between activating chip select and the start of + clock signal, at the start of a transfer. + $ref: /schemas/types.yaml#/definitions/uint32 + + fsl,spi-sck-cs-delay: + description: + Delay in nanoseconds between stopping the clock signal and + deactivating chip select, at the end of a transfer. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - spi-num-chipselects + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/fsl,qoriq-clockgen.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + spi@2100000 { + compatible = "fsl,ls1028a-dspi", "fsl,ls1021a-v1.0-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>; + dmas = <&edma0 0 62>, <&edma0 0 60>; + dma-names = "tx", "rx"; + spi-num-chipselects = <4>; + little-endian; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <10000000>; + reg = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt deleted file mode 100644 index 30a79da9c039..000000000000 --- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +++ /dev/null @@ -1,65 +0,0 @@ -ARM Freescale DSPI controller - -Required properties: -- compatible : must be one of: - "fsl,vf610-dspi", - "fsl,ls1021a-v1.0-dspi", - "fsl,ls1012a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), - "fsl,ls1028a-dspi", - "fsl,ls1043a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), - "fsl,ls1046a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), - "fsl,ls1088a-dspi" (optionally followed by "fsl,ls1021a-v1.0-dspi"), - "fsl,ls2080a-dspi" (optionally followed by "fsl,ls2085a-dspi"), - "fsl,ls2085a-dspi", - "fsl,lx2160a-dspi", -- reg : Offset and length of the register set for the device -- interrupts : Should contain SPI controller interrupt -- clocks: from common clock binding: handle to dspi clock. -- clock-names: from common clock binding: Shall be "dspi". -- pinctrl-0: pin control group to be used for this controller. -- pinctrl-names: must contain a "default" entry. -- spi-num-chipselects : the number of the chipselect signals. - -Optional property: -- big-endian: If present the dspi device's registers are implemented - in big endian mode. -- bus-num : the slave chip chipselect signal number. - -Optional SPI slave node properties: -- fsl,spi-cs-sck-delay: a delay in nanoseconds between activating chip - select and the start of clock signal, at the start of a transfer. -- fsl,spi-sck-cs-delay: a delay in nanoseconds between stopping the clock - signal and deactivating chip select, at the end of a transfer. - -Example: - -dspi0@4002c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,vf610-dspi"; - reg = <0x4002c000 0x1000>; - interrupts = <0 67 0x04>; - clocks = <&clks VF610_CLK_DSPI0>; - clock-names = "dspi"; - spi-num-chipselects = <5>; - bus-num = <0>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_dspi0_1>; - big-endian; - - sflash: at26df081a@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "atmel,at26df081a"; - spi-max-frequency = <16000000>; - spi-cpol; - spi-cpha; - reg = <0>; - linux,modalias = "m25p80"; - modal = "at26df081a"; - fsl,spi-cs-sck-delay = <100>; - fsl,spi-sck-cs-delay = <50>; - }; -}; - - diff --git a/MAINTAINERS b/MAINTAINERS index d92f85ca831d..e2c5b7367db9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7060,7 +7060,7 @@ FREESCALE DSPI DRIVER M: Vladimir Oltean <olteanv@xxxxxxxxx> L: linux-spi@xxxxxxxxxxxxxxx S: Maintained -F: Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt +F: Documentation/devicetree/bindings/spi/fsl,spi-fsl-dspi.yaml F: drivers/spi/spi-fsl-dspi.c F: include/linux/spi/spi-fsl-dspi.h -- 2.17.1
