On Tue, Mar 09, 2021 at 04:36:58PM +0000, Russell King wrote:
> Add 2x2 SFP+ cage support for clearfog-itx boards.
>
> Signed-off-by: Russell King <rmk+kernel@xxxxxxxxxxxxxxx>
What is the implication of [*experimental*] in subject?
Shawn
> ---
> .../boot/dts/freescale/fsl-lx2160a-cex7.dtsi | 24 +++++++
> .../freescale/fsl-lx2160a-clearfog-itx.dtsi | 64 +++++++++++++++++++
> 2 files changed, 88 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
> index 459dccad8326..afb455210bd0 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
> @@ -122,6 +122,30 @@
> vcc-supply = <&sb_3v3>;
> };
> };
> +
> + sfp0_i2c: i2c@4 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <4>;
> + };
> +
> + sfp1_i2c: i2c@5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <5>;
> + };
> +
> + sfp2_i2c: i2c@6 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <6>;
> + };
> +
> + sfp3_i2c: i2c@7 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <7>;
> + };
> };
> };
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
> index 2b63235ca627..17f8e733972a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
> @@ -30,6 +30,54 @@
> gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
> };
> };
> +
> + sfp0: sfp-0 {
> + compatible = "sff,sfp";
> + i2c-bus = <&sfp0_i2c>;
> + mod-def0-gpio = <&gpio2 0 GPIO_ACTIVE_LOW>;
> + maximum-power-milliwatt = <2000>;
> + };
> +
> + sfp1: sfp-1 {
> + compatible = "sff,sfp";
> + i2c-bus = <&sfp1_i2c>;
> + mod-def0-gpio = <&gpio2 9 GPIO_ACTIVE_LOW>;
> + maximum-power-milliwatt = <2000>;
> + };
> +
> + sfp2: sfp-2 {
> + compatible = "sff,sfp";
> + i2c-bus = <&sfp2_i2c>;
> + mod-def0-gpio = <&gpio2 10 GPIO_ACTIVE_LOW>;
> + maximum-power-milliwatt = <2000>;
> + };
> +
> + sfp3: sfp-3 {
> + compatible = "sff,sfp";
> + i2c-bus = <&sfp3_i2c>;
> + mod-def0-gpio = <&gpio2 11 GPIO_ACTIVE_LOW>;
> + maximum-power-milliwatt = <2000>;
> + };
> +};
> +
> +&dpmac7 {
> + sfp = <&sfp0>;
> + managed = "in-band-status";
> +};
> +
> +&dpmac8 {
> + sfp = <&sfp1>;
> + managed = "in-band-status";
> +};
> +
> +&dpmac9 {
> + sfp = <&sfp2>;
> + managed = "in-band-status";
> +};
> +
> +&dpmac10 {
> + sfp = <&sfp3>;
> + managed = "in-band-status";
> };
>
> &emdio2 {
> @@ -44,6 +92,22 @@
> status = "okay";
> };
>
> +&pcs_mdio7 {
> + status = "okay";
> +};
> +
> +&pcs_mdio8 {
> + status = "okay";
> +};
> +
> +&pcs_mdio9 {
> + status = "okay";
> +};
> +
> +&pcs_mdio10 {
> + status = "okay";
> +};
> +
> &sata0 {
> status = "okay";
> };
> --
> 2.20.1
>
