Enable the modem and WiFi subsystems and specify msm8916 specific
firmware path for these and the WCNSS control service.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++++++++
arch/arm64/boot/dts/qcom/msm8916.dtsi | 2 +-
2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 6aef0c2e4f0a..448e3561ef63 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -305,6 +305,12 @@ &mdss {
status = "okay";
};
+&mpss {
+ status = "okay";
+
+ firmware-name = "qcom/msm8916/mba.mbn", "qcom/msm8916/modem.mbn";
+};
+
&pm8916_resin {
status = "okay";
linux,code = <KEY_VOLUMEDOWN>;
@@ -312,6 +318,8 @@ &pm8916_resin {
&pronto {
status = "okay";
+
+ firmware-name = "qcom/msm8916/wcnss.mbn";
};
&sdhc_1 {
@@ -394,6 +402,10 @@ &wcd_codec {
qcom,mbhc-vthreshold-high = <75 150 237 450 500>;
};
+&wcnss_ctrl {
+ firmware-name = "qcom/msm8916/WCNSS_qcom_wlan_nv.bin";
+};
+
/* Enable CoreSight */
&cti0 { status = "okay"; };
&cti1 { status = "okay"; };
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 5353da521974..1118836c15dd 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1738,7 +1738,7 @@ smd-edge {
label = "pronto";
- wcnss {
+ wcnss_ctrl: wcnss {
compatible = "qcom,wcnss";
qcom,smd-channels = "WCNSS_CTRL";
--
2.29.2
