Hello, This series adds Core power domain driver for NVIDIA Tegra SoCs and a common OPP helper which initializes OPP table specifically for Tegra drivers. The patches depend on the ongoing series [1] which adds resource-managed OPP API. [1] https://patchwork.kernel.org/project/linux-pm/list/?series=446525 NVIDIA Tegra SoCs have a dedicated "Core" power domain to which majority of SoC peripherals belong. The core domain is connected to a dedicated voltage rail, which is exposed as a voltage regulator to the Linux kernel. Adding support for power management (i.e. voltage scaling) of the Core domain allows to significantly improve power consumption of the Tegra chip. In particular this PM work solves the overheating problem on Tegra30 devices. It allows Ouya Tegra30 game console to run at 40C during system idle in oppose to going over 60C. Matt Merhar collected temperature stats on his Ouya [2] which show a very significant improvement. [2] https://imgur.com/a/z4NDWqk Changelog: v3: - This series is a continuation of [3][4]. I factored out and grouped these soc/tegra patches since they have a common dependency on the OPP API patches [1] and the rest of PM patches depend on this series. [3] https://lore.kernel.org/lkml/20201217180638.22748-1-digetx@xxxxxxxxx/ [4] https://lore.kernel.org/linux-pm/20210121191410.13781-1-digetx@xxxxxxxxx/ - Added locking around regulators syncing, which was previously done by the OPP core, but then we (me and Viresh) figured out that it will be better to do it within the PD driver. - The Core-PD driver now restores the boot voltage level before shutdown/reboot, which may help some devices not to hang on reboot, like Nexus 7 for example. - Added r-b from Ulf Hansson to "regulators: Support Core domain state syncing" patch, which he gave to v2. - It should be cleaner to add the Core OPP tables and power domain to the device-trees once all drivers will get the PM support, so this series adds the driver and the binding for now. - Added t-b from Paul Fertser, who tested the complete patchset on his AC100 netbook and helped to spot compatibility problem with older DTBs in the patch that will add PM support to the GPU driver. - The DT binding now follows the power-domain spec, which was suggested by Krzysztof Kozlowski in his comment to v2. Dmitry Osipenko (6): soc/tegra: Add devm_tegra_core_dev_init_opp_table() soc/tegra: Add CONFIG_SOC_TEGRA_COMMON and select PM_OPP by default dt-bindings: power: tegra: Add binding for core power domain soc/tegra: Introduce core power domain driver soc/tegra: regulators: Support Core domain state syncing soc/tegra: pmc: Link children power domains to the parent domain .../power/nvidia,tegra20-core-domain.yaml | 52 ++++++ drivers/soc/tegra/Kconfig | 19 +++ drivers/soc/tegra/Makefile | 1 + drivers/soc/tegra/common.c | 138 ++++++++++++++++ drivers/soc/tegra/core-power-domain.c | 154 ++++++++++++++++++ drivers/soc/tegra/pmc.c | 16 ++ drivers/soc/tegra/regulators-tegra20.c | 19 ++- drivers/soc/tegra/regulators-tegra30.c | 18 +- include/soc/tegra/common.h | 36 ++++ 9 files changed, 451 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/power/nvidia,tegra20-core-domain.yaml create mode 100644 drivers/soc/tegra/core-power-domain.c -- 2.29.2
