Re: [Linux-stm32] [PATCH 5/8] ARM: dts: stm32: introduce stm32h7-pinctrl.dtsi to support stm32h75x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ahmad,

Thanks for discussing.

On Thu, Mar 11, 2021 at 8:55 PM Ahmad Fatoum <a.fatoum@xxxxxxxxxxxxxx> wrote:
>
> Hello Dillon,
>
> On 11.03.21 13:23, dillon min wrote:
> > For stm32h7's new board support , I guess following the stm32f7/stm32f4's style
> > is a reasonable way to do it, but add a little optimization。
> > which means :
> > old structure
> > stm32h7-pinctrl.dtsi --> stm32h743-pinctrl.dtsi  (referenced by
> > stm32h743i-disco, -eval)
> >                                 |--> stm32h750-pinctrl.dtsi
> > (referenced by stm32h750i-art-pi, etc)
> > add art-pi other board's pin definition in stm32h750-pinctrl.dtsi with
> > xxx_pins_a, xxx_pins_b
> > xxx_pins_a used for art-pi, xxx_pins_b used for other boards.
> >
> > after more boards add in support, there will be more xxx_pin_c, .... defined
> >
> > as the pin map is according to the hardware schematic diagram io connection.
> > so, why not move xxx_pin_x to a board specific place. such as
> > stm32h750i-art-pi.dts
> >
> > new structure:
> > 1, rename stm32h743-pinctrl.dtsi to stm32h7-pinctrl.dtsi (only
> > preserve gpioa...k,)
> > 2, move xxx_pins_x from stm32h7-pinctrl.dtsi to
> > stm32h7xx-disco/eval/art-pi/etc.dts (as they depends on hardware
> > schematic)
> >
> > stm32h7-pinctrl.dtsi --> stm32h743i-discon.dts
> >                                 |--> stm32h743i-eval.dts
> >                                 |--> stm32h750i-art-pi.dts
> >                                 |--> stm32h7xxx.dts
> > would you agree this ?
>
> If the optimization you intend is reducing DTB size, you can flag
> all pinctrl groups with /omit-if-no-ref/ to have dtc throw them
> away if they are unused.
Thanks for your advice, actually, DTB size is not my first consideration.
different board pin configuration place to one dtsi files, it's a little hard
to maintain when a lot of boards add in.

>
> (But in general, I am in favor of having board-specific configuration
>  in the board dts)
Yes, same to me.
>
> Cheers,
> Ahmad
>
> --
> Pengutronix e.K.                           |                             |
> Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
> 31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
> Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux