Add the sysfs variables to expose the user space functionalities
like DCC enable, disable, configure addresses and software triggers.
Also add the necessary methods along with the same.
Signed-off-by: Souradeep Chowdhury <schowdhu@xxxxxxxxxxxxxx>
---
drivers/soc/qcom/dcc.c | 1179 +++++++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 1171 insertions(+), 8 deletions(-)
diff --git a/drivers/soc/qcom/dcc.c b/drivers/soc/qcom/dcc.c
index 89816bf..61e5225 100644
--- a/drivers/soc/qcom/dcc.c
+++ b/drivers/soc/qcom/dcc.c
@@ -17,12 +17,30 @@
#include <linux/slab.h>
#include <linux/uaccess.h>
+
+#define TIMEOUT_US 100
+
+#define dcc_writel(drvdata, val, off) \
+ writel((val), drvdata->base + dcc_offset_conv(drvdata, off))
#define dcc_readl(drvdata, off) \
readl(drvdata->base + dcc_offset_conv(drvdata, off))
+#define dcc_sram_readl(drvdata, off) \
+ readl(drvdata->ram_base + off)
+
/* DCC registers */
#define DCC_HW_INFO 0x04
#define DCC_LL_NUM_INFO 0x10
+#define DCC_STATUS 0x1C
+#define DCC_LL_LOCK(m) (0x34 + 0x80 * m)
+#define DCC_LL_CFG(m) (0x38 + 0x80 * m)
+#define DCC_LL_BASE(m) (0x3c + 0x80 * m)
+#define DCC_FD_BASE(m) (0x40 + 0x80 * m)
+#define DCC_LL_TIMEOUT(m) (0x44 + 0x80 * m)
+#define DCC_LL_INT_ENABLE(m) (0x4C + 0x80 * m)
+#define DCC_LL_INT_STATUS(m) (0x50 + 0x80 * m)
+#define DCC_LL_SW_TRIGGER(m) (0x60 + 0x80 * m)
+#define DCC_LL_BUS_ACCESS_STATUS(m) (0x64 + 0x80 * m)
#define DCC_MAP_LEVEL1 0x18
#define DCC_MAP_LEVEL2 0x34
@@ -36,24 +54,38 @@
#define DCC_FIX_LOOP_OFFSET 16
#define DCC_VER_INFO_BIT 9
+#define DCC_READ 0
+#define DCC_WRITE 1
+#define DCC_LOOP 2
+#define DCC_READ_WRITE 3
+
+#define MAX_DCC_OFFSET GENMASK(9, 2)
+#define MAX_DCC_LEN GENMASK(6, 0)
+#define MAX_LOOP_CNT GENMASK(7, 0)
+
+#define DCC_ADDR_DESCRIPTOR 0x00
+#define DCC_LOOP_DESCRIPTOR BIT(30)
+#define DCC_RD_MOD_WR_DESCRIPTOR BIT(31)
+#define DCC_LINK_DESCRIPTOR GENMASK(31, 30)
+
+#define DCC_READ_IND 0x00
+#define DCC_WRITE_IND (BIT(28))
+
+#define DCC_AHB_IND 0x00
+#define DCC_APB_IND BIT(29)
+
#define DCC_MAX_LINK_LIST 8
#define DCC_INVALID_LINK_LIST GENMASK(7, 0)
#define DCC_VER_MASK1 GENMASK(6, 0)
#define DCC_VER_MASK2 GENMASK(5, 0)
-#define DCC_RD_MOD_WR_ADDR 0xC105E
+#define DCC_RD_MOD_WR_ADDR 0xC105E
struct qcom_dcc_config {
const int dcc_ram_offset;
};
-enum dcc_mem_map_ver {
- DCC_MEM_MAP_VER1,
- DCC_MEM_MAP_VER2,
- DCC_MEM_MAP_VER3
-};
-
enum dcc_descriptor_type {
DCC_ADDR_TYPE,
DCC_LOOP_TYPE,
@@ -61,6 +93,12 @@ enum dcc_descriptor_type {
DCC_WRITE_TYPE
};
+enum dcc_mem_map_ver {
+ DCC_MEM_MAP_VER1,
+ DCC_MEM_MAP_VER2,
+ DCC_MEM_MAP_VER3
+};
+
struct dcc_config_entry {
u32 base;
u32 offset;
@@ -98,6 +136,22 @@ struct dcc_drvdata {
u8 loopoff;
};
+struct dcc_cfg_attr {
+ u32 addr;
+ u32 prev_addr;
+ u32 prev_off;
+ u32 link;
+ u32 sram_offset;
+};
+
+struct dcc_cfg_loop_attr {
+ u32 loop;
+ bool loop_start;
+ u32 loop_cnt;
+ u32 loop_len;
+ u32 loop_off;
+};
+
static u32 dcc_offset_conv(struct dcc_drvdata *drvdata, u32 off)
{
if (drvdata->mem_map_ver == DCC_MEM_MAP_VER1) {
@@ -114,6 +168,832 @@ static u32 dcc_offset_conv(struct dcc_drvdata *drvdata, u32 off)
return off;
}
+static int dcc_sram_writel(struct dcc_drvdata *drvdata,
+ u32 val, u32 off)
+{
+ if (unlikely(off > (drvdata->ram_size - 4)))
+ return -EINVAL;
+
+ writel((val), drvdata->ram_base + off);
+
+ return 0;
+}
+
+static bool dcc_ready(struct dcc_drvdata *drvdata)
+{
+ u32 val;
+
+ /* poll until DCC ready */
+ if (!readl_poll_timeout((drvdata->base + DCC_STATUS), val,
+ (FIELD_GET(GENMASK(1, 0), val) == 0), 1, TIMEOUT_US))
+ return true;
+
+ return false;
+}
+
+static int dcc_read_status(struct dcc_drvdata *drvdata)
+{
+ int curr_list;
+ u32 bus_status;
+ u32 ll_cfg = 0;
+ u32 tmp_ll_cfg = 0;
+
+ for (curr_list = 0; curr_list < drvdata->nr_link_list; curr_list++) {
+ if (!drvdata->enable[curr_list])
+ continue;
+
+ bus_status = dcc_readl(drvdata, DCC_LL_BUS_ACCESS_STATUS(curr_list));
+
+ if (bus_status) {
+ dev_err(drvdata->dev,
+ "Read access error for list %d err: 0x%x.\n",
+ curr_list, bus_status);
+
+ ll_cfg = dcc_readl(drvdata, DCC_LL_CFG(curr_list));
+ tmp_ll_cfg = ll_cfg & ~BIT(9);
+ dcc_writel(drvdata, tmp_ll_cfg, DCC_LL_CFG(curr_list));
+ dcc_writel(drvdata, 0x3,
+ DCC_LL_BUS_ACCESS_STATUS(curr_list));
+ dcc_writel(drvdata, ll_cfg, DCC_LL_CFG(curr_list));
+ return -ENODATA;
+ }
+ }
+
+ return 0;
+}
+
+static int dcc_sw_trigger(struct dcc_drvdata *drvdata)
+{
+ int ret = 0;
+ int curr_list;
+ u32 ll_cfg = 0;
+ u32 tmp_ll_cfg = 0;
+
+ mutex_lock(&drvdata->mutex);
+
+ for (curr_list = 0; curr_list < drvdata->nr_link_list; curr_list++) {
+ if (!drvdata->enable[curr_list])
+ continue;
+ ll_cfg = dcc_readl(drvdata, DCC_LL_CFG(curr_list));
+ tmp_ll_cfg = ll_cfg & ~BIT(9);
+ dcc_writel(drvdata, tmp_ll_cfg, DCC_LL_CFG(curr_list));
+ dcc_writel(drvdata, 1, DCC_LL_SW_TRIGGER(curr_list));
+ dcc_writel(drvdata, ll_cfg, DCC_LL_CFG(curr_list));
+ }
+
+ if (!dcc_ready(drvdata)) {
+ dev_err(drvdata->dev,
+ "DCC is busy after receiving sw tigger.\n");
+ ret = -EBUSY;
+ goto err;
+ }
+
+ ret = dcc_read_status(drvdata);
+
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static void _dcc_ll_cfg_reset_link(struct dcc_cfg_attr *cfg)
+{
+ cfg->addr = 0;
+ cfg->link = 0;
+ cfg->prev_off = 0;
+ cfg->prev_addr = cfg->addr;
+}
+
+static int _dcc_ll_cfg_read_write(struct dcc_drvdata *drvdata,
+ struct dcc_config_entry *entry,
+ struct dcc_cfg_attr *cfg)
+{
+ int ret;
+
+ if (cfg->link) {
+ /*
+ * write new offset = 1 to continue
+ * processing the list
+ */
+
+ ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset);
+ if (ret)
+ return ret;
+ cfg->sram_offset += 4;
+ /* Reset link and prev_off */
+ _dcc_ll_cfg_reset_link(cfg);
+ }
+
+ cfg->addr = DCC_RD_MOD_WR_DESCRIPTOR;
+ ret = dcc_sram_writel(drvdata, cfg->addr, cfg->sram_offset);
+ if (ret)
+ return ret;
+
+ cfg->sram_offset += 4;
+ ret = dcc_sram_writel(drvdata, entry->mask, cfg->sram_offset);
+ if (ret)
+ return ret;
+
+ cfg->sram_offset += 4;
+ ret = dcc_sram_writel(drvdata, entry->write_val, cfg->sram_offset);
+ if (ret)
+ return ret;
+
+ cfg->sram_offset += 4;
+ cfg->addr = 0;
+ return ret;
+}
+
+static int _dcc_ll_cfg_loop(struct dcc_drvdata *drvdata, struct dcc_config_entry *entry,
+ struct dcc_cfg_attr *cfg,
+ struct dcc_cfg_loop_attr *cfg_loop,
+ u32 *total_len)
+{
+
+ int ret;
+
+ /* Check if we need to write link of prev entry */
+ if (cfg->link) {
+ ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset);
+ if (ret)
+ return ret;
+ cfg->sram_offset += 4;
+ }
+
+ if (cfg_loop->loop_start) {
+ cfg_loop->loop = (cfg->sram_offset - cfg_loop->loop_off) / 4;
+ cfg_loop->loop |= (cfg_loop->loop_cnt << drvdata->loopoff) &
+ GENMASK(27, drvdata->loopoff);
+ cfg_loop->loop |= DCC_LOOP_DESCRIPTOR;
+ *total_len += (*total_len - cfg_loop->loop_len) * cfg_loop->loop_cnt;
+
+ ret = dcc_sram_writel(drvdata, cfg_loop->loop, cfg->sram_offset);
+
+ if (ret)
+ return ret;
+ cfg->sram_offset += 4;
+
+ cfg_loop->loop_start = false;
+ cfg_loop->loop_len = 0;
+ cfg_loop->loop_off = 0;
+ } else {
+ cfg_loop->loop_start = true;
+ cfg_loop->loop_cnt = entry->loop_cnt - 1;
+ cfg_loop->loop_len = *total_len;
+ cfg_loop->loop_off = cfg->sram_offset;
+ }
+
+ /* Reset link and prev_off */
+
+ _dcc_ll_cfg_reset_link(cfg);
+
+ return ret;
+}
+
+static int _dcc_ll_cfg_write(struct dcc_drvdata *drvdata,
+ struct dcc_config_entry *entry,
+ struct dcc_cfg_attr *cfg,
+ u32 *total_len)
+{
+ u32 off;
+ int ret;
+
+ if (cfg->link) {
+ /*
+ * write new offset = 1 to continue
+ * processing the list
+ */
+ ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset);
+
+ if (ret)
+ return ret;
+
+ cfg->sram_offset += 4;
+ /* Reset link and prev_off */
+ cfg->addr = 0;
+ cfg->prev_off = 0;
+ cfg->prev_addr = cfg->addr;
+ }
+
+ off = entry->offset/4;
+ /* write new offset-length pair to correct position */
+ cfg->link |= ((off & GENMASK(7, 0)) | BIT(15) | ((entry->len << 8) & GENMASK(14, 8)));
+ cfg->link |= DCC_LINK_DESCRIPTOR;
+
+ /* Address type */
+ cfg->addr = (entry->base >> 4) & GENMASK(27, 0);
+ if (entry->apb_bus)
+ cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_WRITE_IND | DCC_APB_IND;
+ else
+ cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_WRITE_IND | DCC_AHB_IND;
+ ret = dcc_sram_writel(drvdata, cfg->addr, cfg->sram_offset);
+ if (ret)
+ return ret;
+
+ cfg->sram_offset += 4;
+ ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset);
+ if (ret)
+ return ret;
+
+ cfg->sram_offset += 4;
+ ret = dcc_sram_writel(drvdata, entry->write_val, cfg->sram_offset);
+ if (ret)
+ return ret;
+
+ cfg->sram_offset += 4;
+ cfg->addr = 0;
+ cfg->link = 0;
+ return ret;
+}
+
+static int _dcc_ll_cfg_default(struct dcc_drvdata *drvdata,
+ struct dcc_config_entry *entry,
+ struct dcc_cfg_attr *cfg,
+ u32 *pos, u32 *total_len)
+{
+ int ret;
+ u32 off;
+
+ cfg->addr = (entry->base >> 4) & GENMASK(27, 0);
+
+ if (entry->apb_bus)
+ cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_READ_IND | DCC_APB_IND;
+ else
+ cfg->addr |= DCC_ADDR_DESCRIPTOR | DCC_READ_IND | DCC_AHB_IND;
+
+ off = entry->offset/4;
+ *total_len += entry->len * 4;
+
+ if (!cfg->prev_addr || cfg->prev_addr != cfg->addr || cfg->prev_off > off) {
+ /* Check if we need to write prev link entry */
+ if (cfg->link) {
+ ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset);
+ if (ret)
+ return ret;
+ cfg->sram_offset += 4;
+ }
+ dev_dbg(drvdata->dev, "DCC: sram address 0x%x\n", cfg->sram_offset);
+
+ /* Write address */
+ ret = dcc_sram_writel(drvdata, cfg->addr, cfg->sram_offset);
+
+ if (ret)
+ return ret;
+
+ cfg->sram_offset += 4;
+
+ /* Reset link and prev_off */
+ cfg->link = 0;
+ cfg->prev_off = 0;
+ }
+
+ if ((off - cfg->prev_off) > 0xFF || entry->len > MAX_DCC_LEN) {
+ dev_err(drvdata->dev, "DCC: Programming error Base: 0x%x, offset 0x%x\n",
+ entry->base, entry->offset);
+ ret = -EINVAL;
+ return ret;
+ }
+
+ if (cfg->link) {
+ /*
+ * link already has one offset-length so new
+ * offset-length needs to be placed at
+ * bits [29:15]
+ */
+ *pos = 15;
+
+ /* Clear bits [31:16] */
+ cfg->link &= GENMASK(14, 0);
+ } else {
+ /*
+ * link is empty, so new offset-length needs
+ * to be placed at bits [15:0]
+ */
+ *pos = 0;
+ cfg->link = 1 << 15;
+ }
+
+ /* write new offset-length pair to correct position */
+ cfg->link |= (((off-cfg->prev_off) & GENMASK(7, 0)) |
+ ((entry->len << 8) & GENMASK(14, 8))) << *pos;
+ cfg->link |= DCC_LINK_DESCRIPTOR;
+
+ if (*pos) {
+ ret = dcc_sram_writel(drvdata, cfg->link, cfg->sram_offset);
+ if (ret)
+ return ret;
+ cfg->sram_offset += 4;
+ cfg->link = 0;
+ }
+
+ cfg->prev_off = off + entry->len - 1;
+ cfg->prev_addr = cfg->addr;
+ return ret;
+}
+
+static int __dcc_ll_cfg(struct dcc_drvdata *drvdata, int curr_list)
+{
+ int ret = 0;
+ u32 total_len, pos;
+ struct dcc_config_entry *entry;
+ struct dcc_cfg_attr cfg;
+ struct dcc_cfg_loop_attr cfg_loop;
+
+ memset(&cfg, 0, sizeof(cfg));
+ memset(&cfg_loop, 0, sizeof(cfg_loop));
+ cfg.sram_offset = drvdata->ram_cfg * 4;
+ total_len = 0;
+
+ list_for_each_entry(entry, &drvdata->cfg_head[curr_list], list) {
+ switch (entry->desc_type) {
+ case DCC_READ_WRITE_TYPE:
+ ret = _dcc_ll_cfg_read_write(drvdata, entry, &cfg);
+ if (ret)
+ goto overstep;
+ break;
+
+ case DCC_LOOP_TYPE:
+ ret = _dcc_ll_cfg_loop(drvdata, entry, &cfg, &cfg_loop, &total_len);
+ if (ret)
+ goto overstep;
+ break;
+
+ case DCC_WRITE_TYPE:
+ ret = _dcc_ll_cfg_write(drvdata, entry, &cfg, &total_len);
+ if (ret)
+ goto overstep;
+ break;
+
+ default:
+ ret = _dcc_ll_cfg_default(drvdata, entry, &cfg, &pos, &total_len);
+ if (ret)
+ goto overstep;
+ break;
+ }
+ }
+
+ if (cfg.link) {
+ ret = dcc_sram_writel(drvdata, cfg.link, cfg.sram_offset);
+ if (ret)
+ goto overstep;
+ cfg.sram_offset += 4;
+ }
+
+ if (cfg_loop.loop_start) {
+ dev_err(drvdata->dev, "DCC: Programming error: Loop unterminated\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* Handling special case of list ending with a rd_mod_wr */
+ if (cfg.addr == DCC_RD_MOD_WR_DESCRIPTOR) {
+ cfg.addr = (DCC_RD_MOD_WR_ADDR) & GENMASK(27, 0);
+ cfg.addr |= DCC_ADDR_DESCRIPTOR;
+ ret = dcc_sram_writel(drvdata, cfg.addr, cfg.sram_offset);
+ if (ret)
+ goto overstep;
+ cfg.sram_offset += 4;
+ }
+
+ /* Setting zero to indicate end of the list */
+ cfg.link = DCC_LINK_DESCRIPTOR;
+ ret = dcc_sram_writel(drvdata, cfg.link, cfg.sram_offset);
+ if (ret)
+ goto overstep;
+ cfg.sram_offset += 4;
+
+ /* Update ram_cfg and check if the data will overstep */
+ drvdata->ram_cfg = (cfg.sram_offset + total_len) / 4;
+ if (cfg.sram_offset + total_len > drvdata->ram_size) {
+ cfg.sram_offset += total_len;
+ goto overstep;
+ }
+
+ drvdata->ram_start = cfg.sram_offset/4;
+ return 0;
+overstep:
+ ret = -EINVAL;
+ memset_io(drvdata->ram_base, 0, drvdata->ram_size);
+ dev_err(drvdata->dev, "DCC SRAM oversteps, 0x%x (0x%x)\n",
+ cfg.sram_offset, drvdata->ram_size);
+
+err:
+ return ret;
+}
+
+static int dcc_valid_list(struct dcc_drvdata *drvdata, int curr_list)
+{
+ u32 lock_reg;
+
+ if (list_empty(&drvdata->cfg_head[curr_list]))
+ return -EINVAL;
+
+ if (drvdata->enable[curr_list]) {
+ dev_err(drvdata->dev, "List %d is already enabled\n",
+ curr_list);
+ return -EINVAL;
+ }
+
+ lock_reg = dcc_readl(drvdata, DCC_LL_LOCK(curr_list));
+ if (lock_reg & 0x1) {
+ dev_err(drvdata->dev, "List %d is already locked\n",
+ curr_list);
+ return -EINVAL;
+ }
+
+ dev_err(drvdata->dev, "DCC list passed %d\n", curr_list);
+ return 0;
+}
+
+static bool is_dcc_enabled(struct dcc_drvdata *drvdata)
+{
+ bool dcc_enable = false;
+ int list;
+
+ for (list = 0; list < DCC_MAX_LINK_LIST; list++) {
+ if (drvdata->enable[list]) {
+ dcc_enable = true;
+ break;
+ }
+ }
+
+ return dcc_enable;
+}
+
+static int dcc_enable(struct dcc_drvdata *drvdata)
+{
+ int ret = 0;
+ int list;
+ u32 ram_cfg_base;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (!is_dcc_enabled(drvdata)) {
+ memset_io(drvdata->ram_base,
+ 0xDE, drvdata->ram_size);
+ }
+
+ for (list = 0; list < drvdata->nr_link_list; list++) {
+
+ if (dcc_valid_list(drvdata, list))
+ continue;
+
+ /* 1. Take ownership of the list */
+ dcc_writel(drvdata, BIT(0), DCC_LL_LOCK(list));
+
+ /* 2. Program linked-list in the SRAM */
+ ram_cfg_base = drvdata->ram_cfg;
+ ret = __dcc_ll_cfg(drvdata, list);
+ if (ret) {
+ dcc_writel(drvdata, 0, DCC_LL_LOCK(list));
+ dev_info(drvdata->dev, "DCC ram programming failed\n");
+ goto err;
+ }
+
+ /* 3. program DCC_RAM_CFG reg */
+ dcc_writel(drvdata, ram_cfg_base +
+ drvdata->ram_offset/4, DCC_LL_BASE(list));
+ dcc_writel(drvdata, drvdata->ram_start +
+ drvdata->ram_offset/4, DCC_FD_BASE(list));
+ dcc_writel(drvdata, 0xFFF, DCC_LL_TIMEOUT(list));
+
+ /* 4. Clears interrupt status register */
+ dcc_writel(drvdata, 0, DCC_LL_INT_ENABLE(list));
+ dcc_writel(drvdata, (BIT(0) | BIT(1) | BIT(2)),
+ DCC_LL_INT_STATUS(list));
+
+ dev_info(drvdata->dev, "All values written to enable.\n");
+ /* Make sure all config is written in sram */
+ mb();
+
+ drvdata->enable[list] = true;
+
+ /* 5. Configure trigger */
+ dcc_writel(drvdata, BIT(9), DCC_LL_CFG(list));
+ }
+
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static void dcc_disable(struct dcc_drvdata *drvdata)
+{
+ int curr_list;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (!dcc_ready(drvdata))
+ dev_err(drvdata->dev, "DCC is not ready Disabling DCC...\n");
+
+ for (curr_list = 0; curr_list < drvdata->nr_link_list; curr_list++) {
+ if (!drvdata->enable[curr_list])
+ continue;
+ dcc_writel(drvdata, 0, DCC_LL_CFG(curr_list));
+ dcc_writel(drvdata, 0, DCC_LL_BASE(curr_list));
+ dcc_writel(drvdata, 0, DCC_FD_BASE(curr_list));
+ dcc_writel(drvdata, 0, DCC_LL_LOCK(curr_list));
+ drvdata->enable[curr_list] = false;
+ }
+ memset_io(drvdata->ram_base, 0, drvdata->ram_size);
+ drvdata->ram_cfg = 0;
+ drvdata->ram_start = 0;
+ mutex_unlock(&drvdata->mutex);
+}
+
+static ssize_t curr_list_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ mutex_lock(&drvdata->mutex);
+ if (drvdata->curr_list == DCC_INVALID_LINK_LIST) {
+ dev_err(dev, "curr_list is not set.\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = scnprintf(buf, PAGE_SIZE, "%d\n", drvdata->curr_list);
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static ssize_t curr_list_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+ unsigned long val;
+ u32 lock_reg;
+ bool dcc_enable = false;
+
+ if (kstrtoul(buf, 16, &val))
+ return -EINVAL;
+
+ if (val >= drvdata->nr_link_list)
+ return -EINVAL;
+
+ mutex_lock(&drvdata->mutex);
+
+ dcc_enable = is_dcc_enabled(drvdata);
+ if (drvdata->curr_list != DCC_INVALID_LINK_LIST && dcc_enable) {
+ dev_err(drvdata->dev, "DCC is enabled, please disable it first.\n");
+ mutex_unlock(&drvdata->mutex);
+ return -EINVAL;
+ }
+
+ lock_reg = dcc_readl(drvdata, DCC_LL_LOCK(val));
+ if (lock_reg & 0x1) {
+ dev_err(drvdata->dev, "DCC linked list is already configured\n");
+ mutex_unlock(&drvdata->mutex);
+ return -EINVAL;
+ }
+ drvdata->curr_list = val;
+ mutex_unlock(&drvdata->mutex);
+
+ return size;
+}
+
+static DEVICE_ATTR_RW(curr_list);
+
+
+static ssize_t trigger_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret = 0;
+ unsigned long val;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ if (kstrtoul(buf, 16, &val))
+ return -EINVAL;
+ if (val != 1)
+ return -EINVAL;
+
+ ret = dcc_sw_trigger(drvdata);
+ if (!ret)
+ ret = size;
+
+ return ret;
+}
+static DEVICE_ATTR_WO(trigger);
+
+static ssize_t enable_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ bool dcc_enable = false;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ mutex_lock(&drvdata->mutex);
+ if (drvdata->curr_list >= drvdata->nr_link_list) {
+ dev_err(dev, "Select link list to program using curr_list\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ dcc_enable = is_dcc_enabled(drvdata);
+
+ ret = scnprintf(buf, PAGE_SIZE, "%u\n",
+ (unsigned int)dcc_enable);
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static ssize_t enable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret = 0;
+ unsigned long val;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ if (kstrtoul(buf, 16, &val))
+ return -EINVAL;
+
+ if (val)
+ ret = dcc_enable(drvdata);
+ else
+ dcc_disable(drvdata);
+
+ if (!ret)
+ ret = size;
+
+ return ret;
+
+}
+
+static DEVICE_ATTR_RW(enable);
+
+static ssize_t config_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+ struct dcc_config_entry *entry;
+ char local_buf[64];
+ int len = 0, count = 0;
+
+ buf[0] = '\0';
+
+ mutex_lock(&drvdata->mutex);
+ if (drvdata->curr_list >= drvdata->nr_link_list) {
+ dev_err(dev, "Select link list to program using curr_list\n");
+ count = -EINVAL;
+ goto err;
+ }
+
+ list_for_each_entry(entry,
+ &drvdata->cfg_head[drvdata->curr_list], list) {
+ switch (entry->desc_type) {
+ case DCC_READ_WRITE_TYPE:
+ len = snprintf(local_buf, 64, "Index: 0x%x, mask: 0x%x, val: 0x%x\n",
+ entry->index, entry->mask, entry->write_val);
+ break;
+ case DCC_LOOP_TYPE:
+ len = snprintf(local_buf, 64, "Index: 0x%x, Loop: %d\n",
+ entry->index, entry->loop_cnt);
+ break;
+ case DCC_WRITE_TYPE:
+ len = snprintf(local_buf, 64,
+ "Write Index: 0x%x, Base: 0x%x, Offset: 0x%x, len: 0x%x APB: %d\n",
+ entry->index, entry->base, entry->offset, entry->len,
+ entry->apb_bus);
+ break;
+ default:
+ len = snprintf(local_buf, 64,
+ "Read Index: 0x%x, Base: 0x%x, Offset: 0x%x, len: 0x%x APB: %d\n",
+ entry->index, entry->base, entry->offset,
+ entry->len, entry->apb_bus);
+ }
+
+ if ((count + len) > PAGE_SIZE) {
+ dev_err(dev, "DCC: Couldn't write complete config\n");
+ break;
+ }
+ strlcat(buf, local_buf, PAGE_SIZE);
+ count += len;
+ }
+
+err:
+ mutex_unlock(&drvdata->mutex);
+ return count;
+}
+
+static int dcc_config_add(struct dcc_drvdata *drvdata, unsigned int addr,
+ unsigned int len, int apb_bus)
+{
+ int ret;
+ struct dcc_config_entry *entry, *pentry;
+ unsigned int base, offset;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (drvdata->curr_list >= drvdata->nr_link_list) {
+ dev_err(drvdata->dev, "Select link list to program using curr_list\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (!len || len > (drvdata->ram_size / 8)) {
+ dev_err(drvdata->dev, "DCC: Invalid length\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ base = addr & GENMASK(31, 4);
+
+ if (!list_empty(&drvdata->cfg_head[drvdata->curr_list])) {
+ pentry = list_last_entry(&drvdata->cfg_head[drvdata->curr_list],
+ struct dcc_config_entry, list);
+
+ if (pentry->desc_type == DCC_ADDR_TYPE &&
+ addr >= (pentry->base + pentry->offset) &&
+ addr <= (pentry->base +
+ pentry->offset + MAX_DCC_OFFSET)) {
+
+ /* Re-use base address from last entry */
+ base = pentry->base;
+
+ if ((pentry->len * 4 + pentry->base + pentry->offset)
+ == addr) {
+ len += pentry->len;
+
+ if (len > MAX_DCC_LEN)
+ pentry->len = MAX_DCC_LEN;
+ else
+ pentry->len = len;
+
+ addr = pentry->base + pentry->offset +
+ pentry->len * 4;
+ len -= pentry->len;
+ }
+ }
+ }
+
+ offset = addr - base;
+
+ while (len) {
+ entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL);
+ if (!entry) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ entry->base = base;
+ entry->offset = offset;
+ entry->len = min_t(u32, len, MAX_DCC_LEN);
+ entry->index = drvdata->nr_config[drvdata->curr_list]++;
+ entry->desc_type = DCC_ADDR_TYPE;
+ entry->apb_bus = apb_bus;
+ INIT_LIST_HEAD(&entry->list);
+ list_add_tail(&entry->list,
+ &drvdata->cfg_head[drvdata->curr_list]);
+
+ len -= entry->len;
+ offset += MAX_DCC_LEN * 4;
+ }
+
+ mutex_unlock(&drvdata->mutex);
+ return 0;
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static ssize_t config_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret, len, apb_bus;
+ unsigned int base;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+ int nval;
+
+ nval = sscanf(buf, "%x %i %d", &base, &len, &apb_bus);
+ if (nval <= 0 || nval > 3)
+ return -EINVAL;
+
+ if (nval == 1) {
+ len = 1;
+ apb_bus = 0;
+ } else if (nval == 2) {
+ apb_bus = 0;
+ } else {
+ apb_bus = 1;
+ }
+
+ ret = dcc_config_add(drvdata, base, len, apb_bus);
+ if (ret)
+ return ret;
+
+ return size;
+
+}
+
+static DEVICE_ATTR_RW(config);
+
static void dcc_config_reset(struct dcc_drvdata *drvdata)
{
struct dcc_config_entry *entry, *temp;
@@ -135,6 +1015,286 @@ static void dcc_config_reset(struct dcc_drvdata *drvdata)
mutex_unlock(&drvdata->mutex);
}
+
+static ssize_t config_reset_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ unsigned long val;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ if (kstrtoul(buf, 16, &val))
+ return -EINVAL;
+
+ if (val)
+ dcc_config_reset(drvdata);
+
+ return size;
+}
+
+static DEVICE_ATTR_WO(config_reset);
+
+static ssize_t ready_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ mutex_lock(&drvdata->mutex);
+
+ if (drvdata->curr_list >= drvdata->nr_link_list) {
+ dev_err(dev, "Select link list to program using curr_list\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (!drvdata->enable[drvdata->curr_list]) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = scnprintf(buf, PAGE_SIZE, "%u\n",
+ (unsigned int)FIELD_GET(BIT(1), dcc_readl(drvdata, DCC_STATUS)));
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static DEVICE_ATTR_RO(ready);
+
+static ssize_t interrupt_disable_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ return scnprintf(buf, PAGE_SIZE, "%u\n",
+ (unsigned int)drvdata->interrupt_disable);
+}
+
+static ssize_t interrupt_disable_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ unsigned long val;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ if (kstrtoul(buf, 16, &val))
+ return -EINVAL;
+
+ mutex_lock(&drvdata->mutex);
+ drvdata->interrupt_disable = (val ? 1:0);
+ mutex_unlock(&drvdata->mutex);
+ return size;
+}
+
+static DEVICE_ATTR_RW(interrupt_disable);
+
+static int dcc_add_loop(struct dcc_drvdata *drvdata, unsigned long loop_cnt)
+{
+ struct dcc_config_entry *entry;
+
+ entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+
+ entry->loop_cnt = min_t(u32, loop_cnt, MAX_LOOP_CNT);
+ entry->index = drvdata->nr_config[drvdata->curr_list]++;
+ entry->desc_type = DCC_LOOP_TYPE;
+ INIT_LIST_HEAD(&entry->list);
+ list_add_tail(&entry->list, &drvdata->cfg_head[drvdata->curr_list]);
+
+ return 0;
+}
+
+static ssize_t loop_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret;
+ unsigned long loop_cnt;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ mutex_lock(&drvdata->mutex);
+
+ if (kstrtoul(buf, 16, &loop_cnt)) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (drvdata->curr_list >= drvdata->nr_link_list) {
+ dev_err(dev, "Select link list to program using curr_list\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ ret = dcc_add_loop(drvdata, loop_cnt);
+ if (ret)
+ goto err;
+
+ mutex_unlock(&drvdata->mutex);
+ return size;
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static DEVICE_ATTR_WO(loop);
+
+static int dcc_rd_mod_wr_add(struct dcc_drvdata *drvdata, unsigned int mask,
+ unsigned int val)
+{
+ int ret = 0;
+ struct dcc_config_entry *entry;
+
+ mutex_lock(&drvdata->mutex);
+
+ if (drvdata->curr_list >= drvdata->nr_link_list) {
+ dev_err(drvdata->dev, "Select link list to program using curr_list\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (list_empty(&drvdata->cfg_head[drvdata->curr_list])) {
+ dev_err(drvdata->dev, "DCC: No read address programmed\n");
+ ret = -EPERM;
+ goto err;
+ }
+
+ entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL);
+ if (!entry) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ entry->desc_type = DCC_READ_WRITE_TYPE;
+ entry->mask = mask;
+ entry->write_val = val;
+ entry->index = drvdata->nr_config[drvdata->curr_list]++;
+ INIT_LIST_HEAD(&entry->list);
+ list_add_tail(&entry->list, &drvdata->cfg_head[drvdata->curr_list]);
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static ssize_t rd_mod_wr_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret;
+ int nval;
+ unsigned int mask, val;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ nval = sscanf(buf, "%x %x", &mask, &val);
+
+ if (nval <= 1 || nval > 2)
+ return -EINVAL;
+
+ ret = dcc_rd_mod_wr_add(drvdata, mask, val);
+ if (ret)
+ return ret;
+
+ return size;
+
+}
+
+static DEVICE_ATTR_WO(rd_mod_wr);
+
+static int dcc_add_write(struct dcc_drvdata *drvdata, unsigned int addr,
+ unsigned int write_val, int apb_bus)
+{
+ struct dcc_config_entry *entry;
+
+ entry = devm_kzalloc(drvdata->dev, sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+
+ entry->desc_type = DCC_WRITE_TYPE;
+ entry->base = addr & GENMASK(31, 4);
+ entry->offset = addr - entry->base;
+ entry->write_val = write_val;
+ entry->index = drvdata->nr_config[drvdata->curr_list]++;
+ entry->len = 1;
+ entry->apb_bus = apb_bus;
+ INIT_LIST_HEAD(&entry->list);
+ list_add_tail(&entry->list, &drvdata->cfg_head[drvdata->curr_list]);
+
+ return 0;
+}
+
+static ssize_t config_write_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t size)
+{
+ int ret;
+ int nval;
+ unsigned int addr, write_val;
+ int apb_bus = 0;
+ struct dcc_drvdata *drvdata = dev_get_drvdata(dev);
+
+ mutex_lock(&drvdata->mutex);
+
+ nval = sscanf(buf, "%x %x %d", &addr, &write_val, &apb_bus);
+
+ if (nval <= 1 || nval > 3) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (drvdata->curr_list >= drvdata->nr_link_list) {
+ dev_err(dev, "Select link list to program using curr_list\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ if (nval == 3 && apb_bus != 0)
+ apb_bus = 1;
+
+ ret = dcc_add_write(drvdata, addr, write_val, apb_bus);
+ if (ret)
+ goto err;
+
+ mutex_unlock(&drvdata->mutex);
+ return size;
+err:
+ mutex_unlock(&drvdata->mutex);
+ return ret;
+}
+
+static DEVICE_ATTR_WO(config_write);
+
+static const struct device_attribute *dcc_attrs[] = {
+ &dev_attr_trigger,
+ &dev_attr_enable,
+ &dev_attr_config,
+ &dev_attr_config_reset,
+ &dev_attr_ready,
+ &dev_attr_interrupt_disable,
+ &dev_attr_loop,
+ &dev_attr_rd_mod_wr,
+ &dev_attr_curr_list,
+ &dev_attr_config_write,
+ NULL,
+};
+
+static int dcc_create_files(struct device *dev,
+ const struct device_attribute **attrs)
+{
+ int ret = 0, i;
+
+ for (i = 0; attrs[i] != NULL; i++) {
+ ret = device_create_file(dev, attrs[i]);
+ if (ret) {
+ dev_err(dev, "DCC: Couldn't create sysfs attribute: %s\n",
+ attrs[i]->attr.name);
+ break;
+ }
+ }
+ return ret;
+}
+
static int dcc_sram_open(struct inode *inode, struct file *file)
{
struct dcc_drvdata *drvdata = container_of(inode->i_cdev,
@@ -347,6 +1507,9 @@ static int dcc_probe(struct platform_device *pdev)
ret = dcc_sram_dev_init(drvdata);
if (ret)
goto err;
+ ret = dcc_create_files(dev, dcc_attrs);
+ if (ret)
+ goto err;
return ret;
err:
@@ -365,7 +1528,7 @@ static int dcc_remove(struct platform_device *pdev)
}
static const struct qcom_dcc_config sm8150_cfg = {
- .dcc_ram_offset = 0x5000,
+ .dcc_ram_offset = 0x5000,
};
static const struct of_device_id dcc_match_table[] = {
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
