On Mon, 8 Mar 2021 11:14:46 +0530 Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> wrote: > On a typical end product, a vendor may choose to secure some regions in > the NAND memory which are supposed to stay intact between FW upgrades. > The access to those regions will be blocked by a secure element like > Trustzone. So the normal world software like Linux kernel should not > touch these regions (including reading). > > So let's add a property for declaring such secure regions so that the > drivers can skip touching them. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> > --- > Documentation/devicetree/bindings/mtd/nand-controller.yaml | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml > index d0e422f4b3e0..15a674bedca3 100644 > --- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml > +++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml > @@ -143,6 +143,13 @@ patternProperties: > Ready/Busy pins. Active state refers to the NAND ready state and > should be set to GPIOD_ACTIVE_HIGH unless the signal is inverted. > > + secure-regions: > + $ref: /schemas/types.yaml#/definitions/uint32-matrix > + description: > + Regions in the NAND chip which are protected using a secure element > + like Trustzone. This property contains the start address and size of > + the secure regions present. > + Since you declare this as a generic property, I think it'd be simpler to do the check at the core level. > required: > - reg >