Hi Laurent, Thanks. On Mon, Feb 15, 2021 at 06:27:24AM +0200, Laurent Pinchart wrote: > DT bindings examples are customarily indented with 4 spaces. > > Signed-off-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx> Reviewed-by: Rui Miguel Silva <rmfrfs@xxxxxxxxx> ------ Cheers, Rui > --- > .../bindings/media/nxp,imx7-mipi-csi2.yaml | 54 +++++++++---------- > 1 file changed, 27 insertions(+), 27 deletions(-) > > diff --git a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > index 74ff92b5baa3..76fcc8d80ee3 100644 > --- a/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > +++ b/Documentation/devicetree/bindings/media/nxp,imx7-mipi-csi2.yaml > @@ -122,41 +122,41 @@ examples: > #include <dt-bindings/reset/imx7-reset.h> > > mipi_csi: mipi-csi@30750000 { > - compatible = "fsl,imx7-mipi-csi2"; > - reg = <0x30750000 0x10000>; > - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > + compatible = "fsl,imx7-mipi-csi2"; > + reg = <0x30750000 0x10000>; > + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; > > - clocks = <&clks IMX7D_IPG_ROOT_CLK>, > - <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > - <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > - clock-names = "pclk", "wrap", "phy"; > - clock-frequency = <166000000>; > + clocks = <&clks IMX7D_IPG_ROOT_CLK>, > + <&clks IMX7D_MIPI_CSI_ROOT_CLK>, > + <&clks IMX7D_MIPI_DPHY_ROOT_CLK>; > + clock-names = "pclk", "wrap", "phy"; > + clock-frequency = <166000000>; > > - power-domains = <&pgc_mipi_phy>; > - phy-supply = <®_1p0d>; > - resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > + power-domains = <&pgc_mipi_phy>; > + phy-supply = <®_1p0d>; > + resets = <&src IMX7_RESET_MIPI_PHY_MRST>; > > - ports { > - #address-cells = <1>; > - #size-cells = <0>; > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > > - port@0 { > - reg = <0>; > + port@0 { > + reg = <0>; > > - mipi_from_sensor: endpoint { > - remote-endpoint = <&ov2680_to_mipi>; > - data-lanes = <1>; > - }; > - }; > + mipi_from_sensor: endpoint { > + remote-endpoint = <&ov2680_to_mipi>; > + data-lanes = <1>; > + }; > + }; > > - port@1 { > - reg = <1>; > + port@1 { > + reg = <1>; > > - mipi_vc0_to_csi_mux: endpoint { > - remote-endpoint = <&csi_mux_from_mipi_vc0>; > - }; > - }; > + mipi_vc0_to_csi_mux: endpoint { > + remote-endpoint = <&csi_mux_from_mipi_vc0>; > + }; > }; > + }; > }; > > ... > -- > Regards, > > Laurent Pinchart >