Add binding documentation for the pincontrol core found in BCM6362 SoCs. Signed-off-by: Álvaro Fernández Rojas <noltari@xxxxxxxxx> Signed-off-by: Jonas Gorski <jonas.gorski@xxxxxxxxx> --- .../pinctrl/brcm,bcm6362-pinctrl.yaml | 240 ++++++++++++++++++ 1 file changed, 240 insertions(+) create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml new file mode 100644 index 000000000000..57a1718b179a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml @@ -0,0 +1,240 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6362 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@xxxxxxxxx> + - Jonas Gorski <jonas.gorski@xxxxxxxxx> + +description: |+ + The pin controller node should be the child of a syscon node. + + Refer to the bindings described in + Documentation/devicetree/bindings/mfd/syscon.yaml + +properties: + compatible: + const: brcm,bcm6362-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: + Specifies the pin number and flags, as defined in + include/dt-bindings/gpio/gpio.h + const: 2 + + interrupts-extended: + description: + One interrupt per each of the 4 GPIO ports supported by the controller, + sorted by port number ascending order. + minItems: 4 + maxItems: 4 + +patternProperties: + '^.*$': + if: + type: object + then: + properties: + function: + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data, + robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1, + inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts, + uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso, + adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led, + ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1, + ext_irq2, ext_irq3, nand ] + + pins: + $ref: "/schemas/types.yaml#/definitions/string" + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, + gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, + gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] + +required: + - compatible + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + gpio@10000080 { + compatible = "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + + pinctrl: pinctrl { + compatible = "brcm,bcm6362-pinctrl"; + + gpio-controller; + #gpio-cells = <2>; + + interrupts-extended = <&ext_intc 0 0>, + <&ext_intc 1 0>, + <&ext_intc 2 0>, + <&ext_intc 3 0>; + interrupt-names = "gpio24", + "gpio25", + "gpio26", + "gpio27"; + + pinctrl_usb_device_led: usb_device_led { + function = "usb_device_led"; + pins = "gpio0"; + }; + + pinctrl_sys_irq: sys_irq { + function = "sys_irq"; + pins = "gpio1"; + }; + + pinctrl_serial_led: serial_led { + pinctrl_serial_led_clk: serial_led_clk { + function = "serial_led_clk"; + pins = "gpio2"; + }; + + pinctrl_serial_led_data: serial_led_data { + function = "serial_led_data"; + pins = "gpio3"; + }; + }; + + pinctrl_robosw_led_data: robosw_led_data { + function = "robosw_led_data"; + pins = "gpio4"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk { + function = "robosw_led_clk"; + pins = "gpio5"; + }; + + pinctrl_robosw_led0: robosw_led0 { + function = "robosw_led0"; + pins = "gpio6"; + }; + + pinctrl_robosw_led1: robosw_led1 { + function = "robosw_led1"; + pins = "gpio7"; + }; + + pinctrl_inet_led: inet_led { + function = "inet_led"; + pins = "gpio8"; + }; + + pinctrl_spi_cs2: spi_cs2 { + function = "spi_cs2"; + pins = "gpio9"; + }; + + pinctrl_spi_cs3: spi_cs3 { + function = "spi_cs3"; + pins = "gpio10"; + }; + + pinctrl_ntr_pulse: ntr_pulse { + function = "ntr_pulse"; + pins = "gpio11"; + }; + + pinctrl_uart1_scts: uart1_scts { + function = "uart1_scts"; + pins = "gpio12"; + }; + + pinctrl_uart1_srts: uart1_srts { + function = "uart1_srts"; + pins = "gpio13"; + }; + + pinctrl_uart1: uart1 { + pinctrl_uart1_sdin: uart1_sdin { + function = "uart1_sdin"; + pins = "gpio14"; + }; + + pinctrl_uart1_sdout: uart1_sdout { + function = "uart1_sdout"; + pins = "gpio15"; + }; + }; + + pinctrl_adsl_spi: adsl_spi { + pinctrl_adsl_spi_miso: adsl_spi_miso { + function = "adsl_spi_miso"; + pins = "gpio16"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi { + function = "adsl_spi_mosi"; + pins = "gpio17"; + }; + + pinctrl_adsl_spi_clk: adsl_spi_clk { + function = "adsl_spi_clk"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_cs: adsl_spi_cs { + function = "adsl_spi_cs"; + pins = "gpio19"; + }; + }; + + pinctrl_ephy0_led: ephy0_led { + function = "ephy0_led"; + pins = "gpio20"; + }; + + pinctrl_ephy1_led: ephy1_led { + function = "ephy1_led"; + pins = "gpio21"; + }; + + pinctrl_ephy2_led: ephy2_led { + function = "ephy2_led"; + pins = "gpio22"; + }; + + pinctrl_ephy3_led: ephy3_led { + function = "ephy3_led"; + pins = "gpio23"; + }; + + pinctrl_ext_irq0: ext_irq0 { + function = "ext_irq0"; + pins = "gpio24"; + }; + + pinctrl_ext_irq1: ext_irq1 { + function = "ext_irq1"; + pins = "gpio25"; + }; + + pinctrl_ext_irq2: ext_irq2 { + function = "ext_irq2"; + pins = "gpio26"; + }; + + pinctrl_ext_irq3: ext_irq3 { + function = "ext_irq3"; + pins = "gpio27"; + }; + + pinctrl_nand: nand { + function = "nand"; + group = "nand_grp"; + }; + }; + }; -- 2.20.1
