This patch allows LVDS PHYs to be configured through
the generic functions and through a custom structure
added to the generic union.
The parameters added here are based on common LVDS PHY
implementation practices. The set of parameters
should cover all potential users.
Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
Cc: Vinod Koul <vkoul@xxxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Signed-off-by: Liu Ying <victor.liu@xxxxxxx>
---
v3->v4:
* No change.
v2->v3:
* No change.
v1->v2:
* No change.
include/linux/phy/phy-lvds.h | 48 ++++++++++++++++++++++++++++++++++++++++++++
include/linux/phy/phy.h | 4 ++++
2 files changed, 52 insertions(+)
create mode 100644 include/linux/phy/phy-lvds.h
diff --git a/include/linux/phy/phy-lvds.h b/include/linux/phy/phy-lvds.h
new file mode 100644
index 00000000..1b5b9d6
--- /dev/null
+++ b/include/linux/phy/phy-lvds.h
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2020 NXP
+ */
+
+#ifndef __PHY_LVDS_H_
+#define __PHY_LVDS_H_
+
+/**
+ * struct phy_configure_opts_lvds - LVDS configuration set
+ *
+ * This structure is used to represent the configuration state of a
+ * LVDS phy.
+ */
+struct phy_configure_opts_lvds {
+ /**
+ * @bits_per_lane_and_dclk_cycle:
+ *
+ * Number of bits per data lane and differential clock cycle.
+ */
+ unsigned int bits_per_lane_and_dclk_cycle;
+
+ /**
+ * @differential_clk_rate:
+ *
+ * Clock rate, in Hertz, of the LVDS differential clock.
+ */
+ unsigned long differential_clk_rate;
+
+ /**
+ * @lanes:
+ *
+ * Number of active, consecutive, data lanes, starting from
+ * lane 0, used for the transmissions.
+ */
+ unsigned int lanes;
+
+ /**
+ * @is_slave:
+ *
+ * Boolean, true if the phy is a slave which works together
+ * with a master phy to support dual link transmission,
+ * otherwise a regular phy or a master phy.
+ */
+ bool is_slave;
+};
+
+#endif /* __PHY_LVDS_H_ */
diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h
index e435bdb..d450b44 100644
--- a/include/linux/phy/phy.h
+++ b/include/linux/phy/phy.h
@@ -17,6 +17,7 @@
#include <linux/regulator/consumer.h>
#include <linux/phy/phy-dp.h>
+#include <linux/phy/phy-lvds.h>
#include <linux/phy/phy-mipi-dphy.h>
struct phy;
@@ -51,10 +52,13 @@ enum phy_mode {
* the MIPI_DPHY phy mode.
* @dp: Configuration set applicable for phys supporting
* the DisplayPort protocol.
+ * @lvds: Configuration set applicable for phys supporting
+ * the LVDS phy mode.
*/
union phy_configure_opts {
struct phy_configure_opts_mipi_dphy mipi_dphy;
struct phy_configure_opts_dp dp;
+ struct phy_configure_opts_lvds lvds;
};
/**
--
2.7.4
