Hi Rob Herring, thanks for the comments.
On Tue, Feb 09, 2021 at 01:30:10PM -0600, Rob Herring wrote:
> On Thu, Jan 28, 2021 at 11:08:26AM +0800, Xin Ji wrote:
> > Add 'bus-type' and 'data-lanes' define for port0, add HDCP support
> > flag and DP tx lane0 and lane1 swing register array define.
> >
> > Signed-off-by: Xin Ji <xji@xxxxxxxxxxxxxxxx>
> > ---
> > .../bindings/display/bridge/analogix,anx7625.yaml | 54 +++++++++++++++++++++-
> > 1 file changed, 53 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > index c789784..048deec 100644
> > --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
> > @@ -34,6 +34,24 @@ properties:
> > description: used for reset chip control, RESET_N pin B7.
> > maxItems: 1
> >
> > + analogix,lane0-swing:
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > + maxItems: 20
> > + description:
> > + an array of swing register setting for DP tx lane0 PHY, please don't
> > + add this property, or contact vendor.
> > +
> > + analogix,lane1-swing:
> > + $ref: /schemas/types.yaml#/definitions/uint32-array
> > + maxItems: 20
> > + description:
> > + an array of swing register setting for DP tx lane1 PHY, please don't
> > + add this property, or contact vendor.
> > +
> > + analogix,hdcp-support:
> > + type: boolean
> > + description: indicate the DP tx HDCP support or not.
>
> Please show the new properties in the example.
OK, I'll add it in the example.
>
> > +
> > ports:
> > $ref: /schemas/graph.yaml#/properties/ports
> >
> > @@ -41,13 +59,45 @@ properties:
> > port@0:
> > $ref: /schemas/graph.yaml#/properties/port
> > description:
> > - Video port for MIPI DSI input.
> > + Video port for MIPI input.
> > +
> > + properties:
> > + endpoint:
> > + type: object
> > + additionalProperties: false
> > +
> > + # Properties described in
> > + # Documentation/devicetree/bindings/media/video-interfaces.txt
>
> Now video-interfaces.yaml which should have a $ref here. It's currently
> in media tree and linux-next. Follow the examples there. You'll also
> have to wait for 5.12-rc1 to apply to drm-misc.
OK.
>
> > + properties:
> > + remote-endpoint: true
> > + bus-type: true
> > + data-lanes: true
> > +
> > + required:
> > + - remote-endpoint
> > +
> > + required:
> > + - endpoint
> > +
> >
> > port@1:
> > $ref: /schemas/graph.yaml#/properties/port
> > description:
> > Video port for panel or connector.
> >
> > + properties:
> > + endpoint:
> > + type: object
> > + additionalProperties: false
> > +
> > + # Properties described in
> > + # Documentation/devicetree/bindings/media/video-interfaces.txt
> > + properties:
> > + remote-endpoint: true
> > +
> > + required:
> > + - remote-endpoint
> > +
> > required:
> > - port@0
> > - port@1
> > @@ -81,6 +131,8 @@ examples:
> > reg = <0>;
> > anx7625_in: endpoint {
> > remote-endpoint = <&mipi_dsi>;
> > + bus-type = <5>;
> > + data-lanes = <0 1 2 3>;
> > };
> > };
> >
> > --
> > 2.7.4
> >
