changes v6: - rename it to interrupt-counter - driver fixes - device tree fixes changes v5: - rename it to event counter, since it support different event sources - make it work with gpio-only or irq-only configuration - update yaml binding changes v4: - use IRQ_NOAUTOEN to not enable IRQ by default - rename gpio_ from name pattern and make this driver work any IRQ source. changes v3: - convert counter to atomic_t changes v2: - add commas - avoid possible unhandled interrupts in the enable path - do not use of_ specific gpio functions Add support for GPIO based pulse counter. For now it can only count pulses. With counter char device support, we will be able to attach timestamps and measure actual pulse frequency. Never the less, it is better to mainline this driver now (before chardev patches go mainline), to provide developers additional use case for the counter framework with chardev support. Oleksij Rempel (2): dt-bindings: counter: add event-counter binding counter: add IRQ or GPIO based event counter .../bindings/counter/interrupt-counter.yaml | 62 +++++ MAINTAINERS | 7 + drivers/counter/Kconfig | 10 + drivers/counter/Makefile | 1 + drivers/counter/interrupt-cnt.c | 249 ++++++++++++++++++ 5 files changed, 329 insertions(+) create mode 100644 Documentation/devicetree/bindings/counter/interrupt-counter.yaml create mode 100644 drivers/counter/interrupt-cnt.c -- 2.29.2
