Re: [RFC PATCH 5/7] dt-bindings: regulator: bd9576 add FET ON-resistance for OCW

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 11 Feb 2021 14:35:41 +0200, Matti Vaittinen wrote:
> BD9576MUF provides over-current protection and detection. Current is
> measured as voltage loss over external FET. Allow specifying FET's on
> resistance so current monitoring limits can be converted to voltages.
> 
> Signed-off-by: Matti Vaittinen <matti.vaittinen@xxxxxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/regulator/rohm,bd9576-regulator.yaml | 5 +++++
>  1 file changed, 5 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:
./Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml:31:34: [error] empty value in block mapping (empty-values)

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties:description: "External FET's ON-resistance. Required if VoutS1 OCP/OCW is to be set." is not of type 'object', 'boolean'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties:rohm,ocw-fet-ron-milliohms: None is not of type 'object', 'boolean'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties: {'enum': ['$ref', 'additionalItems', 'additionalProperties', 'allOf', 'anyOf', 'const', 'contains', 'default', 'dependencies', 'deprecated', 'description', 'else', 'enum', 'if', 'items', 'maxItems', 'maximum', 'minItems', 'minimum', 'multipleOf', 'not', 'oneOf', 'pattern', 'patternProperties', 'properties', 'propertyNames', 'required', 'then', 'unevaluatedProperties']} is not allowed for 'description'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: patternProperties:regulator-.+:properties:rohm,ocw-fet-ron-milliohms: None is not of type 'object'
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml: ignoring, error in schema: patternProperties: regulator-.+: properties: rohm,ocw-fet-ron-milliohms
warning: no schema found in file: ./Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml

See https://patchwork.ozlabs.org/patch/1439442

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux