Am Mittwoch, 10. Februar 2021, 12:10:14 CET schrieb Heiko Stuebner: > The rk3399 has two ISPs and right now only the first one is usable. > The second ISP is connected to the TXRX dphy on the soc. > > The phy of ISP1 is only accessible through the DSI controller's > io-memory, so this series adds support for simply using the dsi > controller is a phy if needed. > > That solution is needed at least on rk3399 and rk3288 but no-one > has looked at camera support on rk3288 at all, so right now > only implement the rk3399 specifics. > > changes in v2: > - enable grf-clock also for init callback > to not break if for example hdmi is connected on boot > and disabled the grf clock during its probe > - add Sebastian's Tested-by > - add Rob's Ack for the phy-cells property > > Heiko Stuebner (6): > drm/rockchip: dsi: add own additional pclk handling > dt-bindings: display: rockchip-dsi: add optional #phy-cells property > drm/rockchip: dsi: add ability to work as a phy instead of full dsi > arm64: dts: rockchip: add #phy-cells to mipi-dsi1 > arm64: dts: rockchip: add cif clk-control pinctrl for rk3399 > arm64: dts: rockchip: add isp1 node on rk3399 of course everything was meant to be v2 in the subject. Heiko
