This series attempts to enable V3D on BCM2711, the SoC available on the Raspberry Pi 4 family of boards. Due to the lack of documentation some things are taken as it from testing/downstream implementation[1], which I'm hilighting here: - It's not clear that the following is 100% true, maybe someone can confirm: "In BCM2711 the new ARGON ASB took over V3D. The old ASB is still present with the ISP and H264 bits, and V3D is in the same place in the new ASB as the old one." - Patch #6 I took as is from the downstream implementation, I can't really provide an exact explanation on what changed HW wise. Ultimately, I need confirmation from the Broadcom folks that they are alright with patch #7. With all this, I get a more or less stable experience using mesa 20.3.4 and X11/Gnome. Regards, Nicolas --- Nicolas Saenz Julienne (11): dt-bindings: soc: bcm: bcm2835-pm: Convert bindings to DT schema dt-bindings: soc: bcm: brcm,bcm2835-pm: Add support for bcm2711 ARM: dts: bcm2711: Use proper compatible in PM/Watchdog node mfd: bcm2835-pm: Add support for BCM2711 soc: bcm: bcm2835-power: Add support for BCM2711's ARSAN ASB soc: bcm: bcm2835-power: Bypass power_on/off() calls drm/v3d: Get rid of pm code drm/v3d: Add support for bcm2711 ARM: dts: bcm2711: Enable V3D ARM: configs: Enable DRM_V3D arm64: config: Enable DRM_V3D .../bindings/soc/bcm/brcm,bcm2835-pm.txt | 46 ----------- .../bindings/soc/bcm/brcm,bcm2835-pm.yaml | 80 +++++++++++++++++++ arch/arm/boot/dts/bcm2711.dtsi | 14 +++- arch/arm/configs/multi_v7_defconfig | 1 + arch/arm64/configs/defconfig | 1 + drivers/gpu/drm/v3d/Kconfig | 2 +- drivers/gpu/drm/v3d/v3d_debugfs.c | 18 +---- drivers/gpu/drm/v3d/v3d_drv.c | 12 +-- drivers/gpu/drm/v3d/v3d_gem.c | 9 --- drivers/mfd/bcm2835-pm.c | 55 ++++++++++--- drivers/soc/bcm/bcm2835-power.c | 74 +++++++++++------ include/linux/mfd/bcm2835-pm.h | 1 + 12 files changed, 190 insertions(+), 123 deletions(-) delete mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.txt create mode 100644 Documentation/devicetree/bindings/soc/bcm/brcm,bcm2835-pm.yaml -- 2.30.0
