Hello all
Looks good to me
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@xxxxxxxxxxx>
Regards
On 2/5/21 9:51 AM, Alain Volmat wrote:
> The digital filter related computation are present in the driver
> however the programming of the filter within the IP is missing.
> The maximum value for the DNF is wrong and should be 15 instead of 16.
>
> Fixes: aeb068c57214 ("i2c: i2c-stm32f7: add driver")
>
> Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx>
> ---
> drivers/i2c/busses/i2c-stm32f7.c | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index 9aa8e65b511e..473fbe144b7e 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -57,6 +57,8 @@
> #define STM32F7_I2C_CR1_RXDMAEN BIT(15)
> #define STM32F7_I2C_CR1_TXDMAEN BIT(14)
> #define STM32F7_I2C_CR1_ANFOFF BIT(12)
> +#define STM32F7_I2C_CR1_DNF_MASK GENMASK(11, 8)
> +#define STM32F7_I2C_CR1_DNF(n) (((n) & 0xf) << 8)
> #define STM32F7_I2C_CR1_ERRIE BIT(7)
> #define STM32F7_I2C_CR1_TCIE BIT(6)
> #define STM32F7_I2C_CR1_STOPIE BIT(5)
> @@ -160,7 +162,7 @@ enum {
> };
>
> #define STM32F7_I2C_DNF_DEFAULT 0
> -#define STM32F7_I2C_DNF_MAX 16
> +#define STM32F7_I2C_DNF_MAX 15
>
> #define STM32F7_I2C_ANALOG_FILTER_ENABLE 1
> #define STM32F7_I2C_ANALOG_FILTER_DELAY_MIN 50 /* ns */
> @@ -725,6 +727,13 @@ static void stm32f7_i2c_hw_config(struct stm32f7_i2c_dev *i2c_dev)
> else
> stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
> STM32F7_I2C_CR1_ANFOFF);
> +
> + /* Program the Digital Filter */
> + stm32f7_i2c_clr_bits(i2c_dev->base + STM32F7_I2C_CR1,
> + STM32F7_I2C_CR1_DNF_MASK);
> + stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
> + STM32F7_I2C_CR1_DNF(i2c_dev->setup.dnf));
> +
> stm32f7_i2c_set_bits(i2c_dev->base + STM32F7_I2C_CR1,
> STM32F7_I2C_CR1_PE);
> }
>
--
--
~ Py MORDRET
--
