Re: [PATCH v7 00/14] Tegra XHCI controller ELPG support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Feb 05, 2021 at 05:15:21PM +0100, Thierry Reding wrote:
> On Wed, Jan 20, 2021 at 03:34:00PM +0800, JC Kuo wrote:
> > Tegra XHCI controler can be placed in ELPG (Engine Level PowerGated)
> > state for power saving when all of the connected USB devices are in
> > suspended state. This patch series includes clk, phy and pmc changes
> > that are required for properly place controller in ELPG and bring
> > controller out of ELPG.
> > 
> > JC Kuo (14):
> >   clk: tegra: Add PLLE HW power sequencer control
> >   clk: tegra: Don't enable PLLE HW sequencer at init
> >   phy: tegra: xusb: Move usb3 port init for Tegra210
> >   phy: tegra: xusb: Rearrange UPHY init on Tegra210
> >   phy: tegra: xusb: Add Tegra210 lane_iddq operation
> >   phy: tegra: xusb: Add sleepwalk and suspend/resume
> >   soc/tegra: pmc: Provide USB sleepwalk register map
> >   arm64: tegra210: XUSB PADCTL add "nvidia,pmc" prop
> >   dt-bindings: phy: tegra-xusb: Add nvidia,pmc prop
> >   phy: tegra: xusb: Add wake/sleepwalk for Tegra210
> >   phy: tegra: xusb: Tegra210 host mode VBUS control
> >   phy: tegra: xusb: Add wake/sleepwalk for Tegra186
> >   usb: host: xhci-tegra: Unlink power domain devices
> >   xhci: tegra: Enable ELPG for runtime/system PM
> > 
> >  .../phy/nvidia,tegra124-xusb-padctl.txt       |    1 +
> >  arch/arm64/boot/dts/nvidia/tegra210.dtsi      |    1 +
> >  drivers/clk/tegra/clk-pll.c                   |   12 -
> >  drivers/clk/tegra/clk-tegra210.c              |   53 +-
> >  drivers/phy/tegra/xusb-tegra186.c             |  558 ++++-
> >  drivers/phy/tegra/xusb-tegra210.c             | 1889 +++++++++++++----
> >  drivers/phy/tegra/xusb.c                      |   92 +-
> >  drivers/phy/tegra/xusb.h                      |   22 +-
> >  drivers/soc/tegra/pmc.c                       |   94 +
> >  drivers/usb/host/xhci-tegra.c                 |  613 ++++--
> >  include/linux/clk/tegra.h                     |    4 +-
> >  include/linux/phy/tegra/xusb.h                |   10 +-
> >  12 files changed, 2784 insertions(+), 565 deletions(-)
> > 
> > v5 "phy: tegra: xusb: tegra210: Do not reset UPHY PLL" is moved
> > into v6 "phy: tegra: xusb: Rearrange UPHY init on Tegra210"
> 
> Mike, Stephen,
> 
> could you guys take a look at the two clk patches here and give an
> Acked-by? There's build-time dependencies throughout the series, so it'd
> be good if they can all go through either the PHY or USB trees.
> 
> Kishon, Greg,
> 
> any comments on these patches? Unfortunately, the USB patches in this
> series have a build-time dependency on the PHY patches, so this should
> all go through one tree. Since this all culminates in the XHCI driver,
> merging this through the USB tree might be best, provided that Kishon
> provides his Acked-by on the PHY patches.
> 
> Alternatively, I can create a set of branches with the correct
> dependencies and send out pull requests for the three subsystems if
> that's preferrable.

I have no objection for the usb patches to go through your tree as they
are hardware-specific.

thanks,

greg k-h



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux