Quoting Shubhrajyoti Datta (2021-02-04 05:53:24) > Add the devicetree binding for the xilinx clocking wizard. > > Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> > --- > v6: > Fix a yaml warning > v7: > Add vendor prefix speed-grade > v8: > Fix the warnings Please run the dt binding checks. > > .../bindings/clock/xlnx,clocking-wizard.yaml | 62 ++++++++++++++++++++++ > 1 file changed, 62 insertions(+) > create mode 100644 Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > > diff --git a/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > new file mode 100644 > index 0000000..579bcc1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/clock/xlnx,clocking-wizard.yaml > @@ -0,0 +1,62 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/clock/xlnx,clocking-wizard.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Xilinx clocking wizard > + > +maintainers: > + - Shubhrajyoti Datta <shubhrajyoti.datta@xxxxxxxxxx> > + > +description: > + The clocking wizard is a soft ip clocking block of Xilinx versal. It > + reads required input clock frequencies from the devicetree and acts as clock > + clock output. > + > +properties: > + compatible: > + const: xlnx,clocking-wizard > + > + "#clock-cells": > + const: 1 > + > + clocks: > + items: > + - description: clock input > + - description: axi clock > + > + clock-names: > + items: > + - const: clk_in1 > + - const: s_axi_aclk > + > + xlnx,speed-grade: > + $ref: /schemas/types.yaml#/definitions/uint32 > + enum: [1, 2, 3] > + description: > + Speed grade of the device. > + > +required: > + - compatible > + - "#clock-cells" > + - clocks > + - clock-names > + - speed-grade Should be xlnx,speed-grade. > + > +additionalProperties: false > + > +examples: > + - | > + clock-generator@40040000 { Just clock-controller please. > + #clock-cells = <1>; > + reg = <0x40040000 0x1000>; > + compatible = "xlnx,clocking-wizard"; > + xlnx,speed-grade = <1>; > + clock-names = "clk_in1", "s_axi_aclk"; > + clocks = <&clkc 15>, <&clkc 15>; > + clock-output-names = "clk_out1", "clk_out2", Please remove this property and auto-generate clk names if necessary. > + "clk_out3", "clk_out4", "clk_out5", > + "clk_out6", "clk_out7"; > + }; >