From: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx> The Rockchip DSI controller on some SoCs also controls a bidrectional dphy, which would be connected to an Image Signal Processor as a phy in the rx configuration. So allow a #phy-cells property for the dsi controller. Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx> --- .../bindings/display/rockchip/dw_mipi_dsi_rockchip.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt index 151be3bba06f..39792f051d2d 100644 --- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt +++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt @@ -23,6 +23,7 @@ Required properties: Optional properties: - phys: from general PHY binding: the phandle for the PHY device. - phy-names: Should be "dphy" if phys references an external phy. +- #phy-cells: Defined when used as ISP phy, should be 0. - power-domains: a phandle to mipi dsi power domain node. - resets: list of phandle + reset specifier pairs, as described in [3]. - reset-names: string reset name, must be "apb". -- 2.29.2
