On Tue, 2 Feb 2021 15:55:50 +0800 Chen-Yu Tsai <wens@xxxxxxxx> wrote: Hi, > On Thu, Jan 28, 2021 at 1:26 AM Andre Przywara <andre.przywara@xxxxxxx> wrote: > > > > The AXP305 PMIC used in AXP805 seems to be fully compatible to the > ^ > This statement doesn't quite make sense. I assume you wanted to mention > a board or the H616 SoC here? Argh, indeed! > > AXP805 PMIC, so add the proper chain of compatible strings. > > > > Also at least on one board (Orangepi Zero2) there is no interrupt line > > connected to the CPU, so make the "interrupts" property optional. > > > > Signed-off-by: Andre Przywara <andre.przywara@xxxxxxx> > > --- > > Documentation/devicetree/bindings/mfd/axp20x.txt | 3 ++- > > 1 file changed, 2 insertions(+), 1 deletion(-) > > > > diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt > > index 4991a6415796..4fd748101e3c 100644 > > --- a/Documentation/devicetree/bindings/mfd/axp20x.txt > > +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt > > @@ -26,10 +26,10 @@ Required properties: > > * "x-powers,axp803" > > * "x-powers,axp806" > > * "x-powers,axp805", "x-powers,axp806" > > + * "x-powers,axp803", "x-powers,axp805", "x-powers,axp806" > > axp305? axp803 is used with A64 IIRC. Oh, well spotted. This AXP naming already confused me when they were all called 80x, now using 30x gave me the rest ;-) Sorry for the blunder! Cheers, Andre > > ChenYu > > > * "x-powers,axp809" > > * "x-powers,axp813" > > - reg: The I2C slave address or RSB hardware address for the AXP chip > > -- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin > > - interrupt-controller: The PMIC has its own internal IRQs > > - #interrupt-cells: Should be set to 1 > > > > @@ -43,6 +43,7 @@ more information: > > AXP20x/LDO3: software-based implementation > > > > Optional properties: > > +- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin > > - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz > > AXP152/20X: range: 750-1875, Default: 1.5 MHz > > AXP22X/8XX: range: 1800-4050, Default: 3 MHz > > -- > > 2.17.5 > > > > -- > > You received this message because you are subscribed to the Google Groups "linux-sunxi" group. > > To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe@xxxxxxxxxxxxxxxx. > > To view this discussion on the web, visit https://groups.google.com/d/msgid/linux-sunxi/20210127172500.13356-5-andre.przywara%40arm.com.
