On Wed, Jan 27, 2021 at 08:00:11AM -0600, Rob Herring wrote: > On Mon, 25 Jan 2021 21:40:08 -0800, mgross@xxxxxxxxxxxxxxx wrote: > > From: Paul Murphy <paul.j.murphy@xxxxxxxxx> > > > > Add DT bindings documentation for the Keem Bay VPU IPC driver. > > > > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > > Cc: devicetree@xxxxxxxxxxxxxxx > > Reviewed-by: Mark Gross <mgross@xxxxxxxxxxxxxxx> > > Signed-off-by: Paul Murphy <paul.j.murphy@xxxxxxxxx> > > Co-developed-by: Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx> > > Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@xxxxxxxxx> > > --- > > .../soc/intel/intel,keembay-vpu-ipc.yaml | 153 ++++++++++++++++++ > > 1 file changed, 153 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml > > > > My bot found errors running 'make dt_binding_check' on your patch: > > yamllint warnings/errors: > ./Documentation/devicetree/bindings/soc/intel/intel,keembay-vpu-ipc.yaml:21:9: [warning] wrong indentation: expected 10 but found 8 (indentation) > > dtschema/dtc warnings/errors: fixed. > > See https://patchwork.ozlabs.org/patch/1432168 > > This check can fail if there are any dependencies. The base for a patch > series is generally the most recent rc1. > > If you already ran 'make dt_binding_check' and didn't see the above > error(s), then make sure 'yamllint' is installed and dt-schema is up to > date: > > pip3 install dtschema --upgrade > > Please check and re-submit. >
