BPi Pro needs TX and RX delay for Gbit to work reliable and avoid high packet loss rates. The realtek phy driver overrides the settings of the pull ups for the delays, so fix this for BananaPro. Fixes: 10662a33dcd9 ("ARM: dts: sun7i: Add dts file for Bananapro board") Signed-off-by: Hermann Lauer <Hermann.Lauer@xxxxxxxxxxxxxxxxx> --- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts --- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts @@ -110,7 +110,7 @@ pinctrl-names = "default"; pinctrl-0 = <&gmac_rgmii_pins>; phy-handle = <&phy1>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-supply = <®_gmac_3v3>; status = "okay"; };